- What it does
- When to use it
- How to activate it
- How to use it
- Settings and controls
- Behind the scenes
- Limits
- If something goes wrong
What it does
The Threats list collects emails your users report as suspicious and, if you use Smart Banners, emails that received a Suspicious (yellow) or Very suspicious (red) banner. Admins open each email, review its content, headers, and AI analysis, then assign an outcome: Safe, Spam, Suspicious, or Unsafe. The outcome is sent to the user and can block or allow the sender in the future.
Threats › Threats in the User Reports tab: a reported phishing email open on the right, with the AI Analysis tab expanded. ① the tabs ② the label dropdown and Remediate ③ the AI Analysis tab · 2026-11
When to use it
- A user has reported an email: review it, assign an outcome, and notify the user.
- The same sender keeps getting reported: resolve their reports and block or allow them for the future.
- Review what Smart Banners have alerted users about: open the Banner alerts tab.
- Report to management or the SOC: export the list to a CSV file.
Not for: managing blocked and allowed senders (Threats › Sender policies). Not for enabling or disabling AI analysis or notifications (Threats › Setup, configuration), or for brand impersonation data (Threats › Dashboard).
How to activate it
It's always active as soon as Threats is available for your company. The list fills up as users report emails.
Requirements
- An admin account with Threats console permission (View and categorize real emails reported by users). This opens all Threats menu items, including the content of every reported email: there is no read-only or partial version.
- Users can report emails: reporting channels and what users receive are described in Report a suspicious email.
- Optional, for the Banner alerts tab: Smart Banners with Log banner emails in Threats enabled. See Preferences › How do I review banner emails in Threats?
- Optional, for the AI Analysis tab: AI Smart Analysis enabled in Threats › Setup.
- Optional, to block senders from this screen: Microsoft 365 and Defender Block Senders setup completed in General Settings › Integrations, including the PowerShell step and Automatic Sender Blocking enabled: see Integrations. Until setup is complete, a block stays in the console and doesn't reach Microsoft Defender: see Sender policies › What does Block do in Microsoft 365? To stop banners for a sender: Smart Banners.
To deactivate: you can't turn off the list from this screen. How to stop Threats for the whole company is described in Setup › How do I stop Threats for the whole company and offboard?
How to use it
Threats › Threats
The page has the list on the left and the selected email on the right. Above the list: the tabs, a select-all box, the search field, filter and sort buttons, and the CSV export icon. Above the email: the label dropdown, Remediate, and the trash icon.
What do the tabs show?
User Reports lists emails reported by users; Banner alerts lists emails that received a yellow or red banner; All threats shows both; Archived shows threats that have already been resolved.
- All threats only appears when Log banner emails in Threats is enabled; it then becomes the default tab.
- Banner alerts is always visible. If banner logging is off, it shows Banner logging is off with a Go to Banners setup button; if you don't have Smart Banners, it shows Smart Banners is not included in your plan.
- An email that received a banner and was then reported by the recipient is a single threat, shown in both User Reports and Banner alerts.
- A threat moves to Archived as soon as it has an outcome, whether you resolved it or a sender policy did so automatically.
What does each row tell me?
Each row shows the subject, who reported it, the sender, the date, and the source.
- Subject: highlighted, with a warning sign, if the email received a yellow banner; in red if it received a red banner.
- Reported by: the user who reported it. For a banner alert, the recipient.
- Sender: the sender's address, colored if it already has a rule in Threats › Sender policies: green with a check if allowed, red with a ban sign if blocked, gray if monitored. Hover to read Sender allowed, Sender blocked, Domain allowed, or Domain blocked and how many threats from this sender have already been resolved.
- Tag under the sender: the sender's tag in Sender policies (Safe, Spam, Suspicious, or Dangerous). If there's no tag, the AI label with a spark icon. When the AI label differs from the tag, it appears next to the tag with a spark icon.
- Red round counter next to the sender: this sender has other pending threats. Click it to list them all.
- Source chip: User reported and, for banner alerts, Banners. A threat can show both.
- Paperclip: the email has attachments.
- For resolved threats: the outcome icon and a speech bubble icon; hover to see when, by whom, and with what comment the threat was handled.
How do I find a threat?
Use the search field, filter button, and sort button above the list.
- Type in the search field → the list keeps threats whose sender name, sender address, subject, or recipient address contains the text.
- Click the filter icon, choose values, then click Apply → the icon stays highlighted while a filter is active.
The filter panel in the Archived tab: Banner Level, Has attachments, Feedback, and Threat ID. ① Feedback ② Threat ID · 2026-11
- Click the sort icon to sort by Report Date, Banner level (only with banner logging enabled), Source, Sender, or Recipient. By default, the most recent report appears first.
Filters are Banner Level (All, No banner, Yellow, Red), Has attachments (All, Yes, No), and Threat ID. The Archived tab adds Feedback (Spam, Safe, Suspicious, Unsafe). The list shows 10, 25, or 50 threats per page.
What can I see about a reported email?
Click a row: the email opens on the right with sender, recipient, authentication results, AI analysis, content, and headers.
- At the top: subject, From, To, Received date, and for a reported email, Reported by and Report date.
- AI Analysis: the AI label (Safe, Spam, Suspicious, or Dangerous). Click the tab to read a two-sentence summary and up to five Key Indicators:. Only appears for reported emails if AI Smart Analysis was enabled when the email was reported.
- Attachment names, shown as chips. To review an attachment, download the entire email.
- DKIM, SPF, and DMARC: Success, Error, Missing, or Unknown, read from the authentication results the email had when it arrived in the inbox.
- Display images: email images stay hidden until you enable them.
- Body and Headers tabs. In Headers, the copy icon copies all headers. The cloud icon, Download EML, downloads the original email as message.eml.
- For a banner alert, the content is hidden until you click View body.
A reported email in the Headers tab: DMARC shows Error and images are hidden. ① DKIM, SPF, and DMARC ② Display images ③ Download EML · 2026-11
What do Safe, Spam, Suspicious, and Unsafe do?
The outcome you choose is sent to the user and moves the threat to Archived. By itself, it doesn't block anything: blocking or allowing the sender is a separate checkbox in the resolution window.
The same outcome is called Unsafe in the label dropdown, in the Feedback filter, and in the user's email, and Dangerous in the resolution window, in the AI badge, and in Sender policies.
| Outcome | Subject of the email to the user | Suggested checkbox during resolution | Sent to Microsoft Defender as |
|---|---|---|---|
| Safe | This email was safe | Deactivate banners on future emails (requires Smart Banners) | Not spam |
| Spam | This email was spam | Block future emails (requires Microsoft 365 and Defender Block Senders setup) | Junk |
| Suspicious | This email was suspicious | Block future emails | Phishing |
| Unsafe (Dangerous) | This email was unsafe | Block future emails | Phishing |
The last column only applies to emails sent to Microsoft Defender: see Integrations. What's in the user's email: Report a suspicious email › What email do I receive when my report has been reviewed?
How do I resolve a threat?
Select the threat, click Remediate, check the label, and click Resolve.
Before you start: check if the sender already has a Block or Allow policy (hover over the sender: Sender blocked or Sender allowed). If so, check Block future emails or Deactivate banners on future emails again at step 5. If you leave it unchecked, Resolve will revert that policy to Monitoring: a blocked sender will be unblocked in Microsoft Defender, and an allowed sender will start receiving banners again.
- Select the threat or threats from the list → N selected appears above the email.
- Optionally, choose a label from the dropdown menu next to Remediate. Only pre-select the label for the next step; nothing is saved yet. By default, it shows the sender tag from Sender policies, otherwise the AI label, otherwise Safe.
- Click Remediate → the Threat resolution window opens, showing the email's SUBJECT and From.
The Threat resolution window: Dangerous label, Block future emails checked, Block sender selected, a comment for the user. ① Label ② Block future emails ③ Block sender or Block domain ④ Comment · 2026-11
- Check the Label: Safe, Spam, Suspicious, or Dangerous.
- Optionally, check Block future emails (Spam, Suspicious, Dangerous) or Deactivate banners on future emails (Safe), then choose Block sender or Block domain (Allow sender or Allow domain for Safe). Blocking a domain also blocks all its subdomains, as the window warns. If the box is disabled, hover over it to see why.
- Optionally, write a Comment: this will be included in the email sent to the user.
- Optionally, check Auto-resolve future reports: new reports from this sender will be resolved with the same label and comment. This is not available when blocking.
- Optionally, write an Internal Note: this is saved with the sender rule and is never sent to the user.
- Click Resolve → the message Threat resolved successfully appears, the threats move to Archived, and each user receives an email with the outcome.
What else does Resolve change besides the threat: it also saves the sender (or domain) in Threats › Sender policies, with the label as a tag, even if the box is not checked. If unchecked, it means Monitoring and replaces any existing Block or Allow for that sender. Allow, Block, Monitoring, and auto-resolution are explained there. Blocking only affects future emails: the reported email remains in mailboxes.
Multiple threats at once: all receive the same label and comment. The sender rule is created only for the sender of the first selected threat, and Block sender / Block domain are not offered. To block multiple senders, resolve their threats one sender at a time.
An email without a sender address (only a display name): no sender rule can be created, and the window will say so. Resolve saves the outcome and notifies the user, with the message Threat resolved. No sender rule was created because the sender address is invalid.
How do I change a verdict or remove a threat?
To change a verdict, unarchive the threat and resolve it again; to permanently remove a threat, delete it.
- Unarchive: in the Archived tab, select the threats and click Unarchive → they return to the active tabs without a verdict. The user is not notified and the email they already received is not withdrawn. Resolving again sends a new outcome email.
- Delete: select the threats, click the trash icon, then Delete in the confirmation → the threats and stored emails are deleted. Deletion cannot be undone and does not notify the user.
Select and act on threats one page at a time: selections made on another page are kept, and actions apply to those as well.
What does the export contain?
A CSV file with every threat from the current tab, including your search, filters, and sorting, from all pages.
- Select the tab and filters.
- Click the download icon, Export to CSV → a progress bar shows the percentage, then a file named threats- followed by the date is downloaded.
| Column | Content |
|---|---|
| subject, from_email, from_name | Subject, sender address, and sender name. |
| report_date | When the threat was reported, in UTC (for example 2026-11-03T07:43:50.000Z). |
| reporter_email | The user who reported it; blank for a banner alert that no one reported. |
| feedback_type | The verdict: safe, spam, suspicious, or unsafe; unknown if not yet resolved. |
| count_attachment | 1 if the email has attachments, 0 if not. This is not a count. |
| feedback_giver_email | Who resolved it. A system name instead of an address if a sender policy resolved it automatically. |
| banner_level | The banner received by the email: orange (the yellow banner), red, grey, or blank. |
| feedback_date | When the verdict was given, in UTC. |
The file does not contain the email body, headers, AI analysis, comment, or reporting channel.
Settings and controls
The list has no settings of its own: each control below acts on the list or the selected threats.
| Setting / control | Default | Effect | Who can change it |
|---|---|---|---|
| Tabs All threats · User Reports · Banner alerts · Archived | All threats if banner logging is enabled, otherwise User Reports | Select which threats the list shows (see How to use it). | Administrator |
| Search · filter · sort | Empty · none · most recent report first | Narrows and sorts the list; export follows these. | Administrator |
| Rows per page | 10 | 10, 25, or 50 threats per page. | Administrator |
| Label dropdown menu | Sender tag, otherwise AI label, otherwise Safe | Pre-selects the label in the Threat resolution window. Does not save anything. | Administrator |
| Remediate · Resolve | — | Gives the verdict, archives the threats, notifies users by email, saves the sender rule (see How to use it). | Administrator |
| Unarchive | — | Removes the verdict and returns threats to the active tabs. | Administrator |
| Delete (trash icon) | — | With confirmation. Permanently deletes the threats and their emails. | Administrator |
| Display images | Disabled, each time a threat is opened | Shows the email's images. | Administrator |
| Download EML · Export to CSV | — | Download the original email, or the list as a CSV file. | Administrator |
| Log banner emails in Threats | Disabled | Logs emails with a yellow or red banner in Threats. Set in Preferences. | Administrator |
| AI Smart Analysis | Disabled | Adds the AI Analysis tab to new reports. Set in Threats › Setup. | Administrator |
Behind the scenes
- Reports: a reported email appears in the list when it has been received and processed. If the same email in the same mailbox is reported twice, or reported after a banner alert, only one threat remains. Each recipient of a campaign who reports it creates their own threat. Reported phishing simulations never appear here.
- AI analysis: produced only once, when the report arrives, if AI Smart Analysis is active at that time. It reads headers, links, text, and attachment names, but never the content of attachments.
- Data updates: the list loads when you open the page and after each of your actions. It does not update automatically: reload the page to see new reports.
- Resolution updates the list immediately; the user email and sender rule are handled in the background.
- Microsoft 365 and Google Workspace: the interface is the same. Block future emails only works with Microsoft 365.
Limits
- No read-only access and no restrictions by controller, administrator, or source: anyone with the Threats permission can see and act on every threat in the company, including content (as of 11/03/2026).
- The console shows who resolved a threat, not who opened it (as of 11/03/2026).
- The list does not show which channel was used to report (forward, Outlook button, add-in, banner) (as of 11/03/2026).
- The Microsoft Defender verdict on a sent email is not shown (as of 11/03/2026).
- No AI analysis for banner alerts, nor for emails reported before AI Smart Analysis was enabled. The console does not show a confidence score and has no button to report an AI error: your verdict is what counts (as of 11/03/2026).
- Attachments are not analyzed or opened one by one: download the email to examine them (as of 11/03/2026).
- Resolving multiple threats creates a sender rule only for the sender of the first selected threat (as of 11/03/2026).
- A verdict cannot be changed directly: unarchive the threat and resolve it again, which sends a second email to the user (as of 11/03/2026).
- Deleted threats cannot be restored (as of 11/03/2026).
- One company at a time: there is no consolidated list for multiple companies (as of 11/03/2026).
If something doesn't work
| Symptom | Likely Cause | What the Customer Can Do | When to Contact Support |
|---|---|---|---|
| An email reported by a user isn't in User Reports | The list hasn't been refreshed, or a sender policy with auto-resolution already resolved it and moved it to Archived. | Refresh the page, then check Archived. If it's not there either, see Reporting a Suspicious Email: the user may have reported it from an address unknown to the console. | The user reported from their own mailbox and the email isn't in either tab after a few minutes. |
| The Banner alerts tab shows Banner logging is off | Log banner emails in Threats is turned off in Smart Banners. | Enable Log banner emails in Threats in Smart Banners › Setup, under the Preferences tab. Only emails received from that moment on will be logged. | Logging is enabled and the tab still shows the message. |
| Block future emails or Deactivate banners on future emails is disabled | A requirement is missing: consent to Microsoft Defender for blocking, Smart Banners for allowing. Blocking isn't available on Google Workspace. | Hover over the box and resolve the reason shown. | The requirement is met and the box remains disabled. |
| The message Failed to resolve threat appears | The sender rule couldn't be saved, so the threat wasn't resolved. | Wait a minute, then click Resolve again. | If it fails again: send support the threat ID shown in the page address. |
| Emails from a blocked sender are coming through again, or an allowed sender is getting banners again, after I resolved a threat from them | Resolve was clicked with Block future emails or Deactivate banners on future emails unchecked, so the sender policy reverted to Monitoring. | Block or allow the sender again in Threats › Sender policies. | The policy shows Blocked or Authorized and the issue continues. |
| I resolved multiple threats but only one sender was blocked | The sender rule is only created for the sender of the first selected threat. | Resolve threats from other senders separately, one sender at a time. | — |
| Users receive an outcome email for an email they never reported | An admin resolved a banner alert: its recipient gets the outcome, and this email can't be disabled (as of 11/03/2026). | Explain to the user that it's about a warning banner they received. | — |
| The AI Analysis tab is missing | AI Smart Analysis was off when the email was reported, or the threat is a banner alert, including an email reported after a banner alert already flagged it in that mailbox. | Check that AI Smart Analysis is enabled in Threats › Setup. | It's enabled and new reports still don't have AI Analysis after a few minutes. |
| The AI label says Safe for a phishing email | AI analysis is a suggestion and can be wrong. When the sender has no tags, the label dropdown pre-selects the AI label. | Select the correct Label in Threat resolution, then click Resolve. Your outcome will count. | Many reports get the wrong AI label: send support their Threat IDs. |
| Images are missing in the email | Images are hidden by default. | Enable Display images above the email. | — |
| SPF, DKIM, or DMARC shows Error or Unknown for a legitimate email | A gateway or forwarding service between the sender and your mailbox changed the authentication results, or the email doesn't have them. | Check the authentication headers in the Headers tab. | The headers show a positive result but the console shows Error. |
| CSV export is empty | The current tab and filters don't show any threats, or the list hadn't finished loading. The file will then be empty, without even column names. | Make sure the tab and filters show threats, then export again. | The list shows threats and the file is still empty. |
| Export to CSV ends with An error occurred | Part of the list couldn't be read, so no file was produced. | Wait a minute, then export again. For a very long list, narrow down the tab or filters. | If it fails again: send support the tab and filters you used. |
| The list is empty after I resolved or deleted threats | You were on a later page: when its threats leave the tab, the list stays on that page, now empty. | Go back to the first page, or refresh the page. | — |
| I deleted a threat by mistake | Deletion is permanent. | Ask the user to report the email again. | — |
| Export to CSV finishes but no file is downloaded | The file is only saved after every page of the list is read, so the browser may treat it as an automatic download and block it or ask for confirmation. Closing or refreshing the tab during export will also lose the file. | Allow downloads from the console in your browser, then export again. | Downloads are allowed and the file still doesn't arrive. |
| Emails sent by LibraCyber appear in Threats, like a New threat alert, an outcome, or a confirmation email | A user reported them. Threats only excludes phishing simulations, regardless of sender: any other reported email becomes a threat. | Delete them in Threats › Threats and explain to users what they are. | — |