- What it does
- When to use it
- How to activate it
- How to use it
- Settings and controls
- Behind the scenes
- Limits
- If something goes wrong
What it does
Threats › Setup is the screen where admins choose how Threats handles reported emails for the entire company. Turn AI analysis of reported emails on or off and set its language. Decide whether users get an instant confirmation when they report an email, and what the New threat alert email sent to admins contains. This article also explains who receives that alert and how to stop or restore it.
Threats › Setup: AI Smart Analysis enabled in English, User feedback on, threat details in alert on, .eml attachment off. ① AI Smart Analysis ② Analysis language ③ User feedback ④ the two Admin threat alerts switches · 2026-11
When to use it
- You want an AI label and summary on every email reported by your users, or you want to turn them off.
- Your security team wants the AI summary written in Spanish, French, or Italian instead of English.
- Users are asking if their report was received, or you don't want them to get a confirmation.
- Your SOC wants the sender, subject, and report source in the alert email, or the reported email attached, so they can handle it from their mailbox or ticketing tool.
- An admin is getting alerts they don't need, has stopped receiving them, or alerts need to go to a different mailbox.
Not for: the outcome email users get after you review their report: see Threats list › How do I resolve a threat? The content of emails users receive: see Report a suspicious email. Logging emails with banners in Threats: see Preferences › How do I review banner emails in Threats? Microsoft Defender, webhooks, and API: see Integrations.
How to activate it
The screen is available as soon as Threats is available for your company. Each option starts at its default value (see Settings and controls) and can be changed at any time.
Which administrators can open and change these settings?
You need the Threats permission (View and categorize real emails reported by users), assigned in General Settings › Admins, to open the screen. If every change shows Failed to update settings or Failed to update AI Smart Analysis settings, contact LibraCyber support.
How do I turn an option off, and can I undo it?
Turn off its switch: the change is saved immediately and applies to the next reported email. Any option can be turned back on later.
Turning off AI Smart Analysis stops analysis of new reports. Analyses already produced remain on their threats. Emails reported while it was off are never analyzed, even if you turn it back on later.
How to use it
Open Threats › Setup. The page has two tabs: AI Smart Analysis and Notifications.
How do I change a setting?
Flip its switch, or choose a value: there is no save button.
- Open Threats › Setup. → The settings show their current value.
- Flip a switch or choose a language. → The change is saved instantly, with no confirmation message.
If you see Failed to update settings or Failed to update AI Smart Analysis settings, the control reverts to its previous value. Reload the page and try again.
How do I turn on AI analysis and choose its language?
Turn on AI Smart Analysis, then choose the Analysis language.
- Turn on AI Smart Analysis. → Analysis language becomes available. From this point, every email reported by a user is analyzed as it arrives.
- Choose English, Spanish, French, or Italian in Analysis language. → The summary and key indicators in future analyses are written in that language.
- Open a newly reported email in Threats › Threats. → The AI Analysis tab shows the AI label and summary.
What the tab shows is described in Threats list › What can I see about a reported email? The analysis reads the headers, links, text, and attachment names of the email, never the content of attachments. Details on data handling and AI are in the Service Description & Security document, available on request.
What does a user receive when User feedback is on?
An instant confirmation email every time they report a real email by forwarding it to report@app.mantra.ms or, on Microsoft 365, using the native Microsoft Outlook report button. It is never sent for a phishing simulation: reported simulations get their own email, set in Phishing Simulation. Other reporting channels confirm the report on screen. What the email says and all reporting channels: Report a suspicious email › What confirmation email do I receive?
Who receives the New threat alert email?
By default, every admin in your company, plus any additional address LibraCyber has added at your request. Admins who have clicked Unsubscribe from Threat alerts no longer receive it.
- An admin receives alerts from the moment they become an admin, regardless of their permissions: admins of other modules also receive them.
- Removing someone from admins also stops their alerts.
- To add a mailbox (a SOC or partner address) or to stop alerts for someone else, contact LibraCyber support: recipients can't be changed from the console.
When is an alert sent?
Once for each new threat, when a user reports it.
- The first report of an email by a user sends the alert. If the same user reports it again, nothing is sent. Other users reporting the same email from their own mailbox create their own threat and their own alert.
- An email that only received a warning banner does not send an alert. If its recipient reports it, the alert is sent.
- Reported phishing simulations never send an alert.
What does the alert contain?
By default, a short alert: a user in your company has reported an email, with a See reported emails button that opens the threat in Threats › Threats. The two Admin threat alerts options add details and the reported email.
| Option | What the alert contains |
|---|---|
| Both off (default) | The subject New threat alert, a sentence, and the See reported emails button. |
| Show threat details in the alert | How it was reported and whether a warning banner had already flagged it. Then From, Subject, Sent, To, Attachments with their count, who reported it, the report date, and the Threat ID. The button becomes Open this threat. |
| Include the threat as .eml attachment in threat alert notifications | The reported email is attached as threat.eml and the alert indicates this. |
A New threat alert with threat details and .eml attached, for an email reported by forwarding that had a red banner. ① report source ② From, Subject, Sent, To, Attachments ③ Open this threat ④ Unsubscribe from Threat alerts · 2026-11
The details never include the body or attachments of the email: open the threat, or attach the .eml. Web addresses in the subject are written so they can't be clicked, for example hxxps://example[.]com. The sender's domain is shown in plain ASCII letters, so misleading characters stand out.
The default New threat alert, with both options off. ① See reported emails ② Unsubscribe from Threat alerts · 2026-11
Can our mail rules or SOC tools recognize the alert?
Yes: filter by the sender address, which never changes. The subject is translated into each recipient's language, so a subject-based rule may miss some alerts.
- Sender: no-reply@notify.libracyber.com. The sender name is LibraCyber, or your partner's name if a partner manages your company.
- Subject: New threat alert, in the recipient's language.
- With Show threat details in the alert on, four headers provide details: X-LibraCyber-Threat-Reporter, X-LibraCyber-Threat-Id, X-LibraCyber-Threat-Source, and X-LibraCyber-Threat-Reported-At (date and time in UTC).
X-LibraCyber-Threat-Source values
| Value | How the user reported the email |
|---|---|
| forwarding | Forwarded to report@app.mantra.ms
|
| attachment | Native Microsoft Outlook report button |
| outlook-report-button | LibraCyber add-in for Outlook |
| gmail-report-button | LibraCyber add-in for Gmail |
| banner | Report button on a Smart Banners warning banner |
| unknown | Unknown |
How do I stop receiving alerts?
Click Unsubscribe from Threat alerts at the bottom of an alert and, if prompted, log in to the console.
- Click Unsubscribe from Threat alerts in any alert. → The console opens; if needed, log in with your account.
- The page shows Threat notifications are now disabled. and You can close this tab. → You will no longer receive alerts.
The page shown after Unsubscribe from Threat alerts: Threat notifications are now disabled. · 2026-11
This only stops your alerts, immediately, with no confirmation step. Your admin rights and permissions don't change, and other admins continue to receive their alerts. The link acts on the account logged into the console in that browser, so click it from your own session.
I unsubscribed: how do I get the alerts back?
Contact LibraCyber support: alerts can't be re-enabled from the console. Provide the address that should start receiving them again.
Settings and controls
Each setting applies to the entire company selected in the console. In a group of companies, each company has its own settings. There is no per-user or group level, except for unsubscribing from alerts.
| Setting / Control | Default | What it does | Who can change it |
|---|---|---|---|
| AI Smart Analysis | Off | Adds an AI label, summary, and key indicators to every new email reported by users. | Administrator |
| Analysis language | English | Language for the AI summary and key indicators: English, Spanish, French, or Italian. Only available while AI Smart Analysis is enabled. | Administrator |
| User feedback | On | Sends users an instant confirmation when they report a real email by forwarding it or using the native Microsoft Outlook button. | Administrator |
| Show threat details in the alert | Off | Adds the sender, subject, recipient, and reporting source to the New threat alert email, plus four headers for mail rules. | Administrator |
| Include the threat as .eml attachment in threat alert notifications | Off | Attaches the reported email to the New threat alert email. | Administrator |
| Receive the New threat alert yourself | On for each administrator | Each administrator can stop their own alerts with Unsubscribe from Threat alerts. | Administrator, for their own alerts |
| Who receives the New threat alert | Every administrator | Adds a mailbox (a SOC or partner address), stops alerts for an administrator, or restores them after Unsubscribe. | LibraCyber Support, upon request |
More details on each option:
User feedback
The phrase below the toggle shows which channels are covered: forwarding and the native Microsoft Outlook button on Microsoft 365, forwarding only on Google Workspace. This does not apply to phishing simulations. This screen does not change the text or logo of the email: it will show the LibraCyber logo, or your partner's logo if a partner manages your company.
Show threat details in the alert
Useful when a SOC or ticketing tool reads the alerts: the headers allow a mail rule to route each alert without opening it.
Include the threat as .eml attachment in threat alert notifications
The attachment is the actual phishing email. Your email security might quarantine the alert or remove the attachment: if you use this option, allow the sender no-reply@notify.libracyber.com.
Behind the scenes
- When a change takes effect: each setting is read at the moment it’s used, so a change applies to the next reported email. Nothing already sent will be sent again, and nothing already reported will be re-analyzed.
- AI analysis: generated only once, when the report arrives, if AI Smart Analysis is enabled at that time, and in the language selected at that moment. Changing the language does not translate existing analyses. Banner alerts are not analyzed.
- Confirmation email: sent right after the report is received, to the user who sent it, in their language.
- New threat alert: sent to each recipient in their language when the report is processed. If attaching a very large reported email takes too long, the alert is sent without the attachment.
- Data updates: the screen shows the current values every time you open it.
- Microsoft 365 and Google Workspace: the screen is the same. Only the phrase under User feedback changes, because the native Microsoft Outlook button exists only on Microsoft 365.
Limits
- Administrators cannot choose from the console who receives the New threat alert: adding, removing, or restoring a recipient must go through LibraCyber support (as of 03/11/2026).
- Every administrator receives alerts by default, even those without the Threats permission (as of 03/11/2026).
- No alert is sent for a banner alert that no one has reported, or for a second report of the same email by the same user (as of 03/11/2026).
- AI analysis is not available for banner alerts, or for emails reported while it was disabled. It is only written in English, Spanish, French, or Italian (as of 03/11/2026).
- User feedback covers forwarding and the native Microsoft Outlook button. Other reporting channels confirm the report on screen (as of 03/11/2026).
- The text and logo of confirmation and alert emails cannot be changed from this screen (as of 03/11/2026).
- The alert never contains the body of the email: open the threat, or attach the .eml (as of 03/11/2026).
If something doesn't work
| Symptom | Likely cause | What you can do | When to contact support |
|---|---|---|---|
| User feedback turned itself off after I changed another setting | A known issue: the first change saved on this screen can also turn off User feedback. | Turn User feedback back on. Check it again after your next change. | If it turns off again. |
| Users don't receive any confirmation email after reporting | User feedback is off, the user reported with the add-in or a banner, or the email was a phishing simulation. | Check that User feedback is on in Threats › Setup. The add-in and banners confirm on screen, not by email. | It's on, the user forwarded the email or used the native Microsoft button, and nothing arrives after a few minutes. |
| An administrator isn't receiving the New threat alert | They clicked Unsubscribe from Threat alerts, are not an administrator, or the threat was a banner alert or a repeated report. | Ask LibraCyber support to restore alerts for this administrator. | To restore alerts after Unsubscribe, or if they still aren't receiving them. |
| Administrators who don't manage threats are receiving the New threat alert | Every administrator receives alerts, regardless of their permissions. | Ask each one to click Unsubscribe from Threat alerts. | To stop alerts for multiple administrators at once. |
| No administrator is receiving the New threat alert | Your mail system rejected our alerts, so LibraCyber stopped sending to those addresses; or Threats is disabled for your company. | Allow no-reply@notify.libracyber.com in your email security, then contact LibraCyber support. Only support can resume alerts to those addresses. | Always: only LibraCyber can resume alerts. |
| An alert arrived, but the threat isn't in Threats › Threats | The list wasn't refreshed, a sender policy already resolved the threat and moved it to Archived, or the console is showing another of your companies. | Refresh Threats › Threats, then check Archived. In a group of companies, first select the company shown in the alert. | The threat isn't in either tab for that company. |
| The alert button opens an empty list | The threat was already resolved and is in Archived, or the console is showing another of your companies. | Open the Archived tab: the threat ID remains in the filter. In a group of companies, select the company shown in the alert, then click the button again. | The threat isn't in either tab for that company. |
| The alert doesn't show the sender or subject | Show threat details in the alert is off. | Turn on Show threat details in the alert in Threats › Setup. | It's on and new alerts are still missing details. |
| The alert doesn't have the .eml attachment | The option is off, the reported email was too large to attach in time, or your email security removed it. | Turn on Include the threat as .eml attachment in threat alert notifications. Then check your email security quarantine. | The option is on and no alert has the attachment. |
| Our email security blocks or quarantines the alert | The attached .eml is the actual phishing email. | Allow no-reply@notify.libracyber.com, or turn off the .eml attachment option. | — |
| Our mail rule doesn't catch every alert | The subject is translated into each recipient's language. | Filter by sender no-reply@notify.libracyber.com instead of the subject. | — |
| The AI summary is in the wrong language | The Analysis language was different when the email was reported: existing analyses are not translated. | Choose the language in Analysis language: new reports will use it. | New reports still use another language. |
| A change shows Failed to update settings or Failed to update AI Smart Analysis settings | A temporary error, or your admin account can't change Threats settings. | Reload the page after a moment and try again. | If the message persists. |