This article describes what your users see. Administrators: settings are in AI Analysis and notifications.
- What it does
- When to use it
- How to activate it
- How to use it
- Settings and controls
- Behind the scenes
- Limits
- If something goes wrong
What it does
When an email looks suspicious, employees can report it to their security team with one click or by forwarding it. The report appears in Threats in your LibraCyber console, where admins review it and send the employee a result by email. This article explains what employees see: how to report from each mail app, what confirmation they get, and the emails they receive afterward.
LibraCyber add-in panel after a report: Thank you for reporting this email. ① panel message · 2026-11
When to use it
- Before rollout: to tell employees which reporting methods work in your company and what they’ll receive.
- An employee asks where the report button is, or why they got an email about a report.
- A report didn’t show up in Threats, or an employee didn’t get any confirmation.
- Not for: reviewing reports and sending results (Threats › Threats). Not for installing the report button or connecting Microsoft’s button to LibraCyber: see Setup. Not for what employees see when reporting a phishing simulation: see the Phishing Simulation page, section What feedback does a user get?
How to activate it
Always on once Threats is set up: employees can report as soon as at least one reporting method is available in your company. Your admin chooses and configures these methods (the LibraCyber add-in for Outlook, Microsoft’s Report button, Smart Banners): see Setup. Forwarding to report@app.mantra.ms works with no setup required.
Requirements
- The employee’s email address is registered in your company’s LibraCyber account. Reports from any other address are ignored (see Limits).
- For the Report email button in banners: Smart Banners, with the button enabled.
How to turn it off: whether employees get the confirmation email is decided in Threats › Setup, User feedback. The result email can’t be turned off. How to stop Threats for the whole company is described in Setup.
How to use it
Which reporting method works in my mail app?
Forwarding to report@app.mantra.ms works everywhere. Buttons depend on your mail app and what your company has set up.
| Reporting method | Where it works | What you see after reporting |
|---|---|---|
| LibraCyber add-in: Report phishing to LibraCyber | Outlook with a Microsoft 365 mailbox: classic Outlook for Windows, new Outlook, Outlook for Mac, Outlook on the web, Outlook for iPhone and Android. | A panel in Outlook confirms the report. No email. |
| LibraCyber add-in for Gmail | Gmail with a Google Workspace account, when your company has installed the add-in. | The add-in confirms the report in Gmail. No email. |
| Microsoft Report button, Report phishing option | Outlook with a Microsoft 365 mailbox, when your company sends these reports to LibraCyber. | Microsoft’s confirmation, then a LibraCyber confirmation email. |
Forwarding to report@app.mantra.ms
|
Any mail app: Outlook, Gmail, smartphone apps, and others. | A confirmation email. |
| Report email in a Smart Banner | Any mail app that shows the banner, including Outlook and Gmail, when your company uses Smart Banners. | A browser page confirms the report. No email. |
Other mail apps, like Apple Mail, don’t have a LibraCyber button: forward the email, or use Report email in the banner.
How do I report with the LibraCyber add-in?
Open the email, then select Report phishing to LibraCyber. The report is sent immediately: there’s nothing to confirm.
- Open or select a received email. The button doesn’t appear on drafts or emails you’re composing.
- Select Report phishing to LibraCyber. In Outlook for Windows and Mac, it’s in the ribbon, in the Report Phishing group. In new Outlook and Outlook on the web, it may be under Apps or …. On a smartphone, open the email’s … menu.
- The panel shows Thank you for reporting this email, Your IT Department has been notified. and Do not interact with elements in this email until further notice.
The button is in English, or in French when Outlook is set to French. The panel follows Outlook’s language: English, French, Italian, Spanish, or German; English for any other language.
If the add-in can’t send the report on its own, it opens a new email, already addressed to LibraCyber, with your email attached. Select Send to complete the report. The panel then says To report this email, please forward it to report@app.mantra.ms.
Add-in panel when it can’t send the report on its own: To report this email, please forward it to report@app.mantra.ms. ① panel message · 2026-11
How do I report with the LibraCyber add-in for Gmail?
Open the email in Gmail, then select the LibraCyber button. The report is sent immediately.
- Open a received email in Gmail.
- Select the LibraCyber button. The add-in tells you if the email was a phishing simulation or a real email, which goes to your security team.
Your company’s admin installs the add-in: Setup › Step 2: LibraCyber Gmail add-on (Google Workspace)
How do I report with Microsoft’s Report button?
Select the email, then Report › Report phishing in Outlook. This only works if your admin has connected Microsoft’s button to LibraCyber.
- Use Report phishing. Reports made with Report junk don’t reach your security team in LibraCyber.
- Outlook then removes the email from your inbox: this is how Microsoft’s button works.
- If your company has enabled it, you’ll get a LibraCyber confirmation email (see below).
Outlook, Report menu open on a selected email: Report phishing and Report junk. ① Report phishing · 2026-10
How do I report by forwarding the email?
Forward the email to report@app.mantra.ms, just like you would forward any email.
- Open the email and select Forward.
- Enter
report@app.mantra.msas the recipient, then send.
Use a regular forward, not forward as attachment. Anything you write above the forwarded email goes to your security team along with it. Don’t forward to LibraCyber support: they don’t review suspicious emails.
How do I report from a banner?
Select Report email in the banner at the top of the email; a browser page confirms The email has been forwarded to your IT department. Where the button appears and when you need to sign in: Banners and user actions › Where does a report go?
What happens to the email after I report it?
It stays in your mailbox, except with Microsoft’s button, which removes it. Reporting copies the email to your security team; it doesn’t delete or block anything. Until you get a result, don’t click its links, open its attachments, or reply.
- You can’t add a comment, except for text you write when forwarding.
- You can’t undo a report. If you reported an email by mistake, let your IT department know.
- Reporting the same email again in the same way doesn’t create a second report for your security team; reporting it in two different ways, for example by forwarding and with a button, can create two reports.
Who can report, and from which mailbox?
Anyone whose email address is registered in your company’s LibraCyber account. A report from an unregistered address, like a personal mailbox or alias, is ignored with no message.
- No license required: a registered address can report even if it’s not part of any simulation or course. Even an address from another domain, like a consultant’s, can report once it’s registered in your account.
- With the add-in, the report counts as yours, the person signed in to Outlook. In Outlook for Windows, Mac, and on the web, it also works in a shared mailbox you have access to; not on a smartphone.
- With the Gmail add-in, the report counts as yours, the person signed in to Gmail.
- If the add-in opens a new email instead of reporting, in a shared mailbox or your own, select Send to complete the report. The add-in does this in any mailbox when it can’t sign you in, read the email, reach LibraCyber, or when your address isn’t registered.
- With forwarding, the report counts for the address the forward is sent from. Forwarding from a shared mailbox only works if that shared address is registered.
- Banners in shared mailboxes don’t have the Report email button.
What confirmation email do I get?
After forwarding or using Microsoft’s button, you get 🔎 This email was not a simulation, unless your company has turned it off. The add-in, Gmail add-in, and banner confirm on screen and don’t send any email.
The email says It was not a simulation, followed by your name, and Your IT Department is reviewing the following email you just reported:. It then shows the sender and the start of the subject of the email you reported, and thanks you. If your company mentions stars, it adds Unfortunately, no star this time! and a View my dashboard link: stars are only earned for phishing simulations.
- It arrives in seconds, in your language, from
report@app.mantra.ms. The sender name is LibraCyber, or your partner’s name if a partner manages your LibraCyber account. - You get one for each report, even for the same email.
If the email you reported was a phishing simulation, you’ll get a congratulations instead, and the email won’t go to your security team: see the Phishing Simulation page, section What feedback does a user get?
Confirmation email This email was not a simulation, showing the sender and start of the subject of the reported email. ① reported email card · 2026-11
What email do I get when my report has been reviewed?
When an admin reviews your report, you get an email with the result. It comes from a no-reply address, in your language, and you get it only once per email.
| Subject | Result shown | What the email advises |
|---|---|---|
| ✅ This email was safe | Safe | You can interact with that email and its sender. |
| ⚠️ This email was suspicious | Suspicious | To remain safe, it would be best not to respond to that email. |
| 🚨 This email was unsafe | Unsafe | Don't interact with that email or that sender. |
| 🗑 This email was spam | Spam | This email is unsolicited but is not considered a threat. |
The email starts with Hello and your name, followed by the date you reported the email, the sender, and the beginning of the subject line. Then it says [your company]'s IT team reviewed it, and deemed it was: and the result. If the administrator wrote a comment, it follows with their name. What each result means for your security team: Threats › Threats.
- Automatically resolved: when your security team has set a rule for that sender, the email says your report has been automatically marked with the result according to your security team's instructions. It adds If you feel this classification is incorrect, reach out to your security team directly.
- An email you never reported: if your company uses Smart Banners, you might receive a result for an email that received a Suspicious (yellow) or Very suspicious (red) banner. In this case, it says the following email received a yellow warning banner, or red.
- A second result on the same email means an administrator reviewed it again.
The email with the result This email was suspicious, with the comment and the administrator's name. ① the result ② the administrator's comment · 2026-11
Is there a size limit?
Yes: an email larger than about 7.5 MB, including attachments, can't be reported. Over 10 MB, the add-in says The message is too big to be reported. Between these two sizes, you might see the usual confirmation, but the email won't reach your security team. The add-in message suggests forwarding it, but forwarding has the same limit: let your IT department know about the email another way, for example by phone or chat.
The button is missing: what should I do?
In the meantime, forward the email to report@app.mantra.ms and let your IT department know. Causes and solutions: Troubleshooting.
Settings and controls
Employees don't have settings. What they see is decided by your administrators, as described below.
| Setting / control | Default | Effect | Who can change it |
|---|---|---|---|
| Reporting methods available in your company | Forwarding; with Smart Banners, also the button in the banner | The Outlook add-in, Gmail add-in, and Microsoft button are added by your administrator, who can also hide the banner button: see Configuration. | Administrator |
| User feedback in Threats › Setup | On | Sends the confirmation email 🔎 This email was not a simulation after forwarding or using the Microsoft button. | Administrator |
| Email with the result | Always sent | Cannot be disabled. | — |
| Text of confirmation and result emails | LibraCyber's text, in every language | Your subject and text for each language, in General Settings › Transactional emails when that tab is shown in your console. | Administrator |
| Report email button in banners | See Smart Banners | Shows or hides the button in each banner. Set in Smart Banners preferences. | Administrator |
| Feedback for reported simulations and stars in emails | On | See the Phishing Simulation page, section Settings and controls. | LibraCyber Support, on request |
Behind the scenes
- The employee reports the email in one of four ways.
- LibraCyber checks if it's one of your phishing simulations. If so, the report counts for the simulation and stops there.
- Otherwise, the entire email is stored in Threats and the confirmation is shown or sent.
- When an administrator, or a rule from your security team, gives a result, the result email is sent.
- How long does it take? The confirmation is immediate. The result email arrives when your security team reviews the report: there is no fixed delay.
- Is a forwarded email identical to the original? Not exactly: a forward doesn't include the technical details of the email, so administrators see less information about its origin compared to the buttons.
- Microsoft 365 and Google Workspace: forwarding and the banner button work on both. The Outlook add-in and Microsoft button exist only with Microsoft 365; the Gmail add-in only with Google Workspace.
Limits
- Only addresses registered in your company's LibraCyber account can report; other reports are ignored without any message (as of 11/03/2026).
- An email larger than about 7.5 MB, including attachments, can't be reported (as of 11/03/2026).
- No field for comments and no way to undo a report (as of 11/03/2026).
- The LibraCyber add-in only works in Outlook with a Microsoft 365 mailbox, and the Gmail add-in only in Gmail with a Google Workspace account. Apple Mail and other mail apps: forward the email (as of 11/04/2026).
- The add-in button is only in English or French. In a shared mailbox, it works in Outlook for Windows, Mac, and on the web, but not on smartphones (as of 11/03/2026).
- Microsoft's Report junk does not reach your security team in LibraCyber: only Report phishing does (as of 11/03/2026).
- The add-in, Gmail add-in, and banner button do not send any confirmation email (as of 11/04/2026).
- The result email cannot be disabled and also reaches employees whose email received a warning banner (as of 11/03/2026).
If something doesn't work
The report button doesn't work
| Symptom | Likely cause | What you can do | When to contact support |
|---|---|---|---|
| The Report phishing to LibraCyber button is not in Outlook | The add-in hasn't reached this user yet, the user is outside its deployment, or no received email is open. | Forward the email to report@app.mantra.ms, then check the deployment. Causes and solutions: Troubleshooting › The report button is missing in Outlook: what should I check?
|
The add-in is deployed to the user and the button is still missing after three days. |
| The add-in opens a new email instead of reporting | The add-in couldn't sign in the user, read the email, or reach LibraCyber, or the user's address isn't registered. In a shared mailbox, the causes are the same. | Select Send in the new email opened by the add-in. Then check that the user is registered in your LibraCyber account. | The user is registered and it happens with every report. |
| The add-in says The report button is currently unavailable. | The add-in couldn't report or open a new email. | Forward the email to report@app.mantra.ms. |
It happens to multiple users or for more than one day. |
| The add-in says Outlook version not supported | This Outlook is too old for the add-in, like some installations of Outlook 2016 and 2019. | Select Forward this email, or use Outlook on the web. Update Outlook when possible. | — |
| The add-in says The message is too big to be reported. | The email exceeds the size limit. | Let your IT department know about the email another way. | — |
| The add-in panel keeps spinning, stays on Loading... or stays blank | The add-in can't reach LibraCyber from this computer or network, or Outlook is still signing in the user. | In the meantime, forward the email to report@app.mantra.ms. Then restart Outlook and try again. |
It happens to multiple users, or every time: send the Outlook app and version. |
A report or an email did not arrive as expected
| Symptom | Likely cause | What you can do | When to contact support |
|---|---|---|---|
| A user reported an email, but it's not in Threats | The user's address isn't registered, Report junk by Microsoft was used, the email is too large, or it was a phishing simulation. | Check that the user's address is registered in your LibraCyber account. Then look in Threats › Threats for an automatically resolved report. | The address is registered, the email is small, and after a few minutes it's still missing. |
| A user reported with Report junk by Microsoft and nothing reached the security team | Junk mail reports are not sent to LibraCyber. | Forward it from the junk mail folder to report@app.mantra.ms. |
— |
| A user received two confirmation emails for a single email | The email was reported twice, or through two channels. | No action needed: each report is confirmed. If reported twice the same way, Threats keeps one report; if in two different ways, it may keep two. | — |
No confirmation email, or a result email for an email the user never reported: Troubleshooting › Emails users receive.