- What it does
- When to use it
- How to activate it
- How to use it
- Settings and controls
- Behind the scenes
- Limits
- If something goes wrong
What it does
Sender policies let administrators decide once and for all what happens to emails and future reports from a sender or an entire domain. A policy can let them through without the Smart Banners warning (Allow), block them in Microsoft 365 (Block), or just monitor them (Monitoring). It can also automatically resolve new reports from that sender and email the outcome.
This screen is used by security administrators who manage reported emails in Threats. End users never see it.
Threats › Sender policies, Senders tab: a blocked sender, an allowed sender with auto-resolve enabled, monitored senders with pending reports, and a sender whose domain is allowed. ① Status ② Tag ③ Auto-resolve · 2026-11
When to use it
- Permanently stop a phishing sender or domain. After a real phishing email is reported, block the sender or their domain so Microsoft 365 will stop their future emails.
- Remove warning banners from a trusted vendor. If a partner or internal tool keeps getting Smart Banners warnings, you can allow them for the whole company.
- Stop reviewing the same sender over and over. For a newsletter, a known scam, or a service users keep reporting, turn on auto-resolve: every new report gets the same outcome and comment right away.
- Monitor a sender before deciding. A Monitoring policy doesn’t change anything in the inbox, but shows how many reports from that sender or domain are pending and how many are resolved.
Not for: classifying a single reported email—use Remediate in Threats › Threats for that. Senders trusted by just one user: see Senders marked as safe by users. Removing emails already delivered: a policy only affects future emails.
How to activate it
Sender policies are available as soon as Threats is active: Monitoring, tags, and auto-resolve don’t require anything else. Allow and Block have prerequisites listed below; until those are met, the two options are disabled, with a tooltip explaining why.
Prerequisites
- The Threats permission. Any admin with this can create, edit, and stop any policy.
- Allow: Smart Banners must be enabled for your company. If not, the option shows This action requires Smart Banners to be enabled for your company.
-
Block: Microsoft 365 and the Defender Block Senders integration must be completed in General Settings › Integrations: consent granted, PowerShell step completed by your IT, and Automatic Sender Blocking enabled. Without consent, the option shows Blocking requires Microsoft Defender consent. Configure it in General Settings > Integrations. Setup is described in Integrations › How do I let LibraCyber block senders in Microsoft Defender?
Add Sender Policy on a Microsoft 365 company without Defender consent: Block is disabled and its tooltip links to General Settings › Integrations. ① Block ② the link · 2026-11
How to deactivate it
- A single policy: open it and uncheck Block future emails or Deactivate banners on future emails: it returns to Monitoring. Turn off auto-resolve with its toggle. A policy can’t be deleted from the console.
- Blocking for the whole company: turn off Automatic Sender Blocking in General Settings › Integrations. Any blocks or unblocks made after that won’t reach Microsoft Defender; blocks already present in Microsoft Defender will stay there.
- Any change can be undone by editing the policy again.
How to use it
Threats › Sender policies
The screen has two tabs: Senders (one email address per row) and Domains (one domain per row), each with its own total. Both tabs have the same columns and controls.
| Column | What it shows |
|---|---|
| Sender or Domain | The address or domain. In Senders, when the sender’s domain is allowed or blocked, the domain part is shown as a green or red chip. |
| Status | A ban icon (Blocked) for Block, a checkmark (Authorized) for Allow, an empty cell for Monitoring. |
| Tag | Safe, Spam, Suspicious, or Dangerous; domains can also have Undefined. Dangerous is the outcome that the Threats list calls Unsafe. |
| Pending resolution | Reports for this sender, or any address in this domain, still waiting for an outcome. Highlighted above 0, in red above 5. |
| Resolved | Reports already resolved, by an admin or by auto-resolve. |
| Last Updated | The date the policy was last changed. |
| Auto-resolve | A toggle: if enabled, new reports for this sender are resolved automatically. |
| Internal Note | A note for administrators. End users never see it. |
How do I find a sender or domain?
Type the start of the address in Search senders..., or the start of the domain in Search domains.... The search matches the beginning of the text: type john@, not example.com, to find john@example.com.
- Status filters rows by Block, Allow, or Monitoring (default).
- Select the Sender, Pending resolution, or Last Updated header to sort. The list opens with the most pending reports at the top.
- The Status filter and sorting apply to the 50 rows on the current page.
How do I add a policy for a sender?
Select Add Sender in the Senders tab, enter the address, choose the status and tag, then select Add Sender again.
Before you start: Add Sender also sets the sender’s domain to Monitoring, with no category. If that domain already has a policy in Domains, the policy is reset and a blocked domain is unblocked. In that case, create the sender policy from one of their reported emails using Remediate. Adding a sender that already has a policy replaces it and deletes its Default Comment for Reporters.
- Open Threats › Sender policies and stay on the Senders tab.
- Select Add Sender. → The Add Sender Policy window opens.
- Enter the Sender Email, for example
billing@example.com. - Choose the Status: Monitoring, Allow, or Block.
- Choose the Tag. The available tags depend on the status (see Settings and controls).
- If you want, enable Auto-resolve future reports and write an Internal Note.
The Add Sender Policy window filled out: Allow, tag Safe, auto-resolve enabled. ① Status ② Tag ③ Auto-resolve future reports · 2026-11
- Select Add Sender. → Sender policy created successfully appears and the sender shows up in the list.
To add a comment for reporters, open the new row and fill in Default Comment for Reporters (see How do I change, pause, or stop a policy?).
How do I add a policy for an entire domain?
Select Add Domain in the Domains tab, enter the domain, choose the status and category, then select Add Domain again. A domain policy covers all its subdomains.
- Open Threats › Sender policies and select the Domains tab.
- Select Add Domain. → The Add Domain Policy window opens.
- Enter the Domain, for example
example.comormail.example.com. Don’t use wildcards:example.comalready covers its subdomains. - Choose the Status and Category. Undefined keeps the domain in Monitoring and lets each sender be evaluated individually.
The Add Domain Policy window: example.com, Block, category Dangerous. ① Status ② Category · 2026-11
- If you want, enable Auto-resolve future reports and write an Internal Note.
- Select Add Domain. → Domain policy created successfully appears.
A policy for a subdomain only covers that subdomain: mail.example.com does not cover example.com. The Include parent domain box has no effect: to cover a domain and all its subdomains, add the main domain.
Can I create a policy from a reported email?
Yes: resolve the reported email with Remediate in Threats › Threats. The window can block or allow the sender or their domain and creates or updates the sender policy at the same time.
How do I change, pause, or stop a policy?
Select the row, edit the policy in the window, then select Confirm. There’s no delete: to stop a block or allow, uncheck the box and the policy returns to Monitoring.
- Select the row. → Edit Sender Policy (or Edit Domain Policy) opens.
- Edit what you need:
- Default Tag.
- The box: Block future emails, or Deactivate banners on future emails when the tag is Safe. Checked means Block or Allow; unchecked means Monitoring.
- For a sender: Block sender or Block domain (Allow sender or Allow domain) applies the action to the address or the whole domain. To block or allow an entire domain, use the Domains tab: here, Block domain and Allow domain only work if the domain doesn’t already have a policy, which is rare.
- Default Comment for Reporters, Auto-resolve future reports, Internal Note.
Edit Sender Policy for a blocked sender: Default Tag Dangerous, Block future emails checked, Block sender selected. ① Block future emails ② Block sender or Block domain ③ Confirm · 2026-11
- Select Confirm. → Policy updated successfully appears.
To enable or disable auto-resolve without opening the window, use the Auto-resolve toggle on the row. → Auto-resolve updated appears.
If you choose Block domain or Allow domain for a sender whose domain already has its own policy, the console shows Failed to update policy: instead, edit the domain in the Domains tab.
Export: sender policies cannot be exported.
Settings and controls
Each option is set per policy, by an administrator with the Threats permission. When a sender and their domain both have a policy, the Behind the scenes section explains which one applies.
| Setting / Control | Default | Effect | Who can change it |
|---|---|---|---|
| Status: Monitoring, Allow, Block | Monitoring | Monitoring: nothing happens to emails, reports are just counted. Allow: no Smart Banners will appear on future emails. Block: future emails are blocked by Microsoft 365. In edit windows, the status follows the mailbox. | Administrator |
| Tag (sender) or Category (domain) | Safe for a sender, Undefined for a domain | The outcome assigned to automatically resolved reports and suggested in Remediate. Allow accepts Safe or Spam; Block accepts Spam, Suspicious, or Dangerous; Monitoring accepts any tag. Undefined (domains only) keeps the domain in Monitoring. | Administrator |
| Auto-resolve future reports | Off | New reports from the sender are immediately resolved with the policy's tag and comment, and an outcome email is sent. Not available with Block, or with an Undefined category. | Administrator |
| Default Comment for Reporters | Empty | Text added to the outcome email when a report is automatically resolved. Also pre-fills the Comment when you resolve a threat from this sender using Remediate. | Administrator |
| Internal Note | Empty | A note visible only to administrators. | Administrator |
| Block sender / Block domain (Allow sender / Allow domain) | Sender | In Edit Sender Policy, applies the action to the address or to its entire domain and subdomains. | Administrator |
| Automatic Sender Blocking, in General Settings › Integrations | Off: granting Defender consent does not enable it | Off: blocks and unblocks made in the console no longer reach Microsoft Defender. | Administrator |
Behind the scenes
A policy affects emails and reports that arrive after it is saved. The most specific policy applies: first the sender's address, then its domain, from most specific to main domain.
Which policy applies when both a sender and its domain have one?
For Allow and Block, the most specific Allow or Block policy applies, and Monitoring policies are skipped. For auto-resolve and the suggested outcome, the most specific policy applies, including Monitoring.
-
billing@mail.example.comtakes precedence overmail.example.com, which takes precedence overexample.com. Case does not matter. - An address blocked within an allowed domain is blocked.
- A sender with its own policy, even Monitoring, will not be auto-resolved by the domain's auto-resolve: enable auto-resolve on the sender's row as well.
- The sender is the address in the email's From field; if missing, the technical sender of the message. The Reply-To address is never used.
What does Allow do?
Emails from an allowed sender or domain do not receive any Smart Banners, neither on Microsoft 365 nor on Google Workspace. Allow policies and the Smart Banners Safe List are the same list, shown in two consoles: see Safe list › What’s the difference from Threats sender policies?
What does Block do in Microsoft 365?
The sender or domain is added, with no expiration date, to your Microsoft Defender Tenant Allow/Block List, and Microsoft 365 blocks their future emails. Removing the block removes them from that list.
- Microsoft Defender is the source of truth. About once an hour, LibraCyber reads your Tenant Allow/Block List. A sender blocked directly in Microsoft Defender appears here as Blocked, with tag Dangerous; a block removed in Microsoft Defender disappears from this list. After that check, even senders blocked with tag Spam or Suspicious will show as Dangerous.
- Before the integration works, blocks you create remain in the console and are sent to Microsoft Defender as soon as LibraCyber can read your Tenant Allow/Block List. If the PowerShell step is delayed, it may take up to a day after it runs.
- Blocks are sent in the background. To verify one, search for the sender in the Microsoft Defender Tenant Allow/Block List.
What happens on Google Workspace?
Block is not available: the option remains disabled. Allow works with Smart Banners; Monitoring, tags, and auto-resolve work the same as on Microsoft 365.
What does auto-resolve do and who receives the email?
When a new report matches a policy with auto-resolve, the threat is immediately resolved with the policy's tag and comment. An outcome email is sent to the owner of the mailbox from which the threat originated.
- For a report, it's the user who submitted it: the email says the report was automatically marked … according to your security team's instructions.
- For a banner alert, it's the user whose mailbox received the email with the banner, even if they didn't report anything: the email says the email received a warning banner and was automatically marked.
- Reports already pending when you enable auto-resolve are not affected: resolve them with Remediate.
- Who enabled it? The console does not show this: Last Updated only indicates when the policy was last changed. Auto-resolve is enabled in Threats › Sender policies, or with Auto-resolve future reports when an admin resolves a threat in Threats › Threats.
How do senders get into the list and how are the counters maintained?
A sender appears in the list when you create a policy for them, or after the first resolution of a reported email from them. Senders are detected only from the email's From field.
- Pending resolution increases by one when a report arrives and decreases by one when it is resolved, while Resolved increases by one. A report resolved by auto-resolve goes directly to Resolved.
- Reports are counted on every matching policy: the sender's and each of its domain's policies.
- A deleted report is removed from the counters.
Data updates: the list is refreshed every time you open the screen or change a policy. The counters update as reports come in and are resolved. The check with Microsoft Defender happens about once an hour.
How is this different from the Safe List and from senders marked safe by users?
There are two lists, not three. Allow policies here and the Smart Banners Safe List are a single list valid for the whole company: adding a sender to the Safe List makes them Allow here, and removing them from there deletes their policy here. A user's Mark as safe on a banner is different: it trusts only one address, only for that user, is not a sender policy, and is listed in Senders marked as safe by users. Users cannot trust an entire domain: only admins can do that, here or in the Safe List.
Limits
- A policy cannot be deleted from the console: it can only be set back to Monitoring (as of 11/03/2026).
- Sender policies cannot be exported and there is no change history: no one can see which admin enabled auto-resolve (as of 11/03/2026).
- Block works only on Microsoft 365 (as of 11/03/2026).
- Allow requires Smart Banners (as of 11/03/2026).
- Wildcards are not accepted: a domain policy already covers its subdomains (as of 11/03/2026).
- A sender shown only with a display name, without a valid address, cannot have a policy (as of 11/03/2026).
- A policy only affects future emails and new reports: it does not remove already delivered emails or resolve reports already pending (as of 11/03/2026).
- Each tab loads up to 999 policies; the Status filter and sorting apply to the displayed page (as of 11/03/2026).
If something doesn't work
| Symptom | Likely cause | What you can do | When to contact support |
|---|---|---|---|
| A sender is Blocked, but their emails are still being delivered | The Defender Block Senders integration is not complete, so the block hasn't reached Microsoft Defender yet. | Complete the Defender Block Senders setup in General Settings › Integrations, then search for the sender in the Microsoft Defender Tenant Allow/Block List. | If a day after setup the sender is still missing from the Tenant Allow/Block List, or is there but emails are still coming through. |
| Block is disabled | The company is not on Microsoft 365, or Microsoft Defender consent has not been granted. | Grant consent in Defender Block Senders, General Settings › Integrations. On Google Workspace, blocking is not available. | If consent shows Already granted and Block is still disabled. |
| Allow is disabled | Smart Banners is not active for your company. | Ask your LibraCyber contact about Smart Banners: Allow requires it. | — |
| A Blocked policy disappeared from the list | Microsoft Defender no longer lists the block: it was removed there, or it never reached Microsoft Defender. | Check the sender in the Microsoft Defender Tenant Allow/Block List, then block them again from here. | If it disappears again while the integration is complete. |
| A Blocked policy appeared that no one created here | The sender was blocked directly in Microsoft Defender. | Manage that block in Microsoft Defender, or edit the policy here. | — |
| The tag of a blocked sender changed to Dangerous | The hourly check with Microsoft Defender assigns Dangerous to every blocked sender and disables auto-resolve for them. | You don't need to do anything: the block remains unchanged. | — |
| An allowed sender or domain still receives a banner | A more specific policy blocks them, the domain is still Monitoring or Undefined, or the email contains a second sender address. | Check the sender's row in Senders and the domain's status. | If both are Allow: send support the email with full headers. |
| Auto-resolve is active for a domain, but reports from one of its senders remain pending | That sender has its own policy, without auto-resolve, which takes precedence; or the domain is Undefined. | Enable Auto-resolve on the sender's row in Senders. | If the sender's policy has auto-resolve enabled and the tag set. |
| Reports received before enabling auto-resolve are still pending | Auto-resolve only affects new reports. | Resolve pending reports with Remediate in Threats › Threats. | — |
| After enabling auto-resolve, users receive an outcome email for emails they never reported | Auto-resolve also resolves banner alerts for that sender: each mailbox owner receives the outcome. | Disable auto-resolve for that sender or domain. | — |
| No policy was created when resolving a threat | The sender does not have a valid email address, only a display name. | You don't need to do anything: the threat is resolved, and such senders cannot have a policy. | — |
| Failed to update policy after choosing Block domain or Allow domain in Edit Sender Policy | The domain already has its own policy. | Edit the domain's policy in the Domains tab. | — |
| A domain policy reverted to Monitoring on its own | A sender from that domain was added with Add Sender, which resets the domain's policy. | Set the domain's policy again in the Domains tab. | If the domain was blocked: check that it has returned to the Tenant Allow/Block List. |