- What it does
- When to use it
- How to activate it
- How to use it
- Settings and controls
- Behind the scenes
- Limits
- If something goes wrong
What it does
Preferences is where administrators decide how Smart Banners behaves for the whole company. It sets which buttons appear in banners, which senders are trusted automatically and which optional banners are shown. It also decides whether emails that received a warning are recorded in Threats, and shows the company domains and names that Smart Banners protects against impersonation.
Preferences opens on three groups: Company identity, read-only; Banner-wide settings; Signal settings · Smart Banners › Setup › Preferences · 2026-10-20
When to use it
- You want to remove the Report email or Mark as safe button from banners, for example because users already report through another button, or because you don't want users to dismiss warnings themselves.
- Users receive banners on emails from colleagues, or you want them warned the first time a colleague writes to them.
- Your security team wants to review, in Threats, the emails that received an orange or red banner.
- You want banners without the small LibraCyber credit at the bottom.
- You want to check which company domains and names are protected against look-alike impersonation.
Not for: trusting a specific external sender or domain — use Safe list. Reviewing the senders your users trusted — use Senders marked as safe by users. Turning Smart Banners off for some users — use Users.
How to activate it
Preferences is always active once Smart Banners is set up (see Setup). Every option starts with its default value (Settings and controls) and can be changed at any time.
Which administrators can open and change Preferences?
Opening Preferences needs the Smart Banners permission; changing a setting also needs the permission to edit company settings. An administrator whose account lacks the company settings permissions sees Unable to load banner settings, or the toggle goes back and Failed to update settings appears.
Administrators and their permissions are managed in General Settings › Admins, where the Smart Banners permission is granted. The permission to edit company settings is not listed there: if a change keeps failing, contact LibraCyber support.
How do I turn an option off, and can I undo it?
Switch its toggle off: the change is saved at once and applies to the whole company. Every option can be switched back on later; nothing is lost.
Log banner emails in Threats is the one option with a visible side effect. Turning it off stops recording new banner emails and immediately hides the ones already recorded from Threats. They are not deleted: they show again if you turn logging back on. Emails received while logging was off are never recorded.
How to use it
Open Smart Banners › Setup and select the Preferences tab. The tab has three groups: Company identity (read-only), Banner-wide settings and Signal settings.
How do I change an option?
Switch its toggle: there is no save button, and the message Settings updated confirms the change.
- Open Smart Banners › Setup and select the Preferences tab. → The options are listed with their current value.
- Switch the toggle of the option on or off. → The change is saved immediately and the message Settings updated appears.
After a toggle, the message Settings updated confirms the change is saved · Smart Banners › Setup › Preferences · 2026-10-20
If the message Failed to update settings appears instead, the toggle goes back to its previous value. Try again, and contact support if it keeps failing.
How do I see what an option changes in the mailbox?
Open the example email under the option.
- Select the arrow at the right of an option. → An example email opens under the option and shows the part of the banner it controls.
The arrow opens an example email: here, the Report email button added to an email with no banner · Smart Banners › Setup › Preferences · 2026-10-20
How do I change the protected domains or names?
Through LibraCyber: you can check them here, but not edit them.
- Check the current values in Domains and Names, under Company identity.
- To add, change or remove a value, contact your LibraCyber account team or support. → Once LibraCyber updates the list, the new value appears in Domains or Names.
How do I review banner emails in Threats?
Switch Log banner emails in Threats on, then open the Banner alerts tab in Threats › Threats.
- Switch Log banner emails in Threats on. → From then on, every email that receives an orange or red banner is recorded.
- Open Threats › Threats. → The All threats tab now includes banner emails, and the Banner alerts tab lists only them.
Threats › Banner alerts with logging on: the emails that received an orange or red banner · 2026-10-20
While logging is off, Banner alerts shows Banner logging is off with a Go to Banners setup button.
While logging is off, Banner alerts says Banner logging is off; Go to Banners setup opens Preferences · 2026-10-20
Settings and controls
All options apply to the whole company. The only per-user exception is the first-time-sender banner, which LibraCyber support can switch off for single mailboxes on request (last row). Every option is an on/off switch, except Domains and Names, which are read-only lists.
| Setting / control | Default | What it does | Who can change it |
|---|---|---|---|
| Domains | Set at setup | Domains your company owns, the main domain first. Look-alike domains are flagged as impersonation. | LibraCyber support, on request |
| Names | Set at setup | Your company name, then the other names you trade under. Emails impersonating these names are flagged. | LibraCyber support, on request |
| Show "Report email" button (recommended) | On | Lets users report a suspicious email to your security team in one click, from the banner. | Admin |
| Show "Mark as safe" button (recommended) | On | Lets users stop banners from a sender they recognise and trust. | Admin |
| Log banner emails in Threats | Off | Records in Threats every email that received an orange or red banner. | Admin |
| Trust LibraCyber's own emails (recommended) | On | Emails sent by LibraCyber (for example platform notifications) never receive a banner. | Admin |
| Trust internal colleagues | Off | Emails from any address on one of your Domains, subdomains included, never receive a banner. | Admin |
| Show report button within safe email | Off | Adds the Report button only banner: a report button on emails that did not receive a warning banner. | Admin |
| Show "Analyzed by LibraCyber" on banners | On | Shows a small LibraCyber credit at the bottom of every banner. | Admin |
| Display banner on first-time senders (recommended) | On | Adds a grey informative banner when an external sender writes to a user for the first time. | Admin |
| Display banner on first-time internal senders | Off | Extends the first-time-sender banner to internal mail. | Admin |
| Enable AI detection of VIP Brands impersonation (recommended) | On | Uses AI to spot emails impersonating major brands, and warns the user with an orange banner. | Admin |
| First-time-sender banner for a single mailbox | On | Switches the first-time-sender banner off for the mailboxes you name. | LibraCyber support, on request |
More on each option:
Domains
Emails from these domains skip banners only when Trust internal colleagues is on.
Show "Report email" button (recommended)
Off: the button is removed from new banners.
Show "Mark as safe" button (recommended)
Users' choices are listed in Senders marked as safe by users.
Off: the button is removed from new banners. Senders users already marked as safe stay trusted by them.
Log banner emails in Threats
It lets your team review what users were warned about. Grey banners are never recorded. Only emails received while it is on are recorded.
Trust LibraCyber's own emails (recommended)
Off: emails sent by LibraCyber are analysed like any other email.
Trust internal colleagues
It applies whether or not the sender uses Smart Banners. Check your domains' DKIM and DMARC before you turn it on (Behind the scenes).
Show report button within safe email
The Report button only banner is described in Banners and user actions › When does each banner appear? Not recommended if you already use the LibraCyber report button.
Show "Analyzed by LibraCyber" on banners
The credit links to the LibraCyber website. Off: banners carry no LibraCyber branding.
Display banner on first-time senders (recommended)
The banner appears when the external sender has never written to that user. It is a cue against impersonation and invoice fraud.
Display banner on first-time internal senders
The first email a user gets from a colleague is flagged. It has no effect while Trust internal colleagues is on.
First-time-sender banner for a single mailbox
The rest of the company keeps the banner. It has no effect while Display banner on first-time senders (recommended) is off.
Behind the scenes
Each incoming email is checked against these options before a banner is built (how banners are chosen: Overview › How it works).
- Trusted senders get no banner at all, not even the grey one. Two trust rules are set here, Trust LibraCyber's own emails and Trust internal colleagues; every trusted sender: Overview › What is not covered.
- First-time senders are judged per user: a sender is new for each user who has never received an email from that address.
- Why colleagues rarely get a banner, even with Trust internal colleagues off: internal emails are analysed, but two checks skip your own domains. The first-time-sender banner skips senders on your Domains unless Display banner on first-time internal senders is on. The checks for someone impersonating a colleague skip addresses on your own domains. A colleague's email gets a banner only when it shows another warning sign.
- Business partners are trusted automatically: a sender a user regularly writes to and receives emails from gets no banner for that user. This trust is built per user from their own email traffic; administrators cannot grant, remove or switch it off.
-
Trust internal colleagues looks only at the sender address. If your domain does not reject forged mail, a forged email that uses one of your domains is not flagged either. Before you turn it on, check that your domains publish DKIM and a DMARC policy set to
p=quarantineorp=reject. Then Microsoft 365 or Google Workspace stops forged emails that use your domain. - Logged banner emails and verdict emails: with Log banner emails in Threats on, the mailbox owner can receive a verdict email for a logged banner email, as for an email they reported. This happens when your security team gives a verdict on it in Threats, or when a sender policy with automatic resolution resolves it. The email says that the message received a warning banner, not that the user reported it.
- The buttons inside the banner, and what the user sees after clicking them, are described in Banners and user actions.
How soon does a change apply? To emails processed after it, within a few minutes. Emails already in mailboxes keep the banner they received, buttons included. The same behaviour applies to Microsoft 365 and Google Workspace.
Limits
- Options apply to the whole company; they cannot be set per user or per group, except the first-time-sender banner, which support can switch off for single mailboxes (as of 21/10/2026).
- The automatic trust of business partners cannot be changed or switched off (as of 21/10/2026).
- Domains and Names cannot be edited by administrators; changes go through LibraCyber (as of 20/10/2026).
- Log banner emails in Threats does not record emails received before it was turned on, or while it was off (as of 20/10/2026).
- Enable AI detection of VIP Brands impersonation covers a fixed list of major brands chosen by LibraCyber; the list cannot be edited (as of 20/10/2026).
- Changing an option does not update banners already delivered (as of 20/10/2026).
If something goes wrong
Most problems come from a domain missing from Domains, an option that is off, or a change that applies only to new emails.
| Symptom | Likely cause | What the customer can do | When to contact support |
|---|---|---|---|
| Emails from one of our own domains are flagged as external | The domain is missing from Domains in Preferences. | Check Domains in Smart Banners › Setup › Preferences. | To add the missing domain: only LibraCyber can change Domains. |
| Users receive banners on emails from colleagues | Trust internal colleagues is off, or the colleague writes from a domain that is not in Domains. | Turn Trust internal colleagues on, or Display banner on first-time internal senders off. Check that the colleague's domain is in Domains. | If the domain is missing from Domains, or banners continue after these checks. |
| I turned on Log banner emails in Threats but no banner email appears in Threats | Only emails received after activation are recorded, and only those with an orange or red banner. | Wait for a new email with an orange or red banner, then open the Banner alerts tab in Threats › Threats. | If new orange or red banners do not appear in Banner alerts after a few minutes. |
| Banner emails disappeared from Threats | Log banner emails in Threats was turned off: recorded banner emails are hidden while it is off. | Turn Log banner emails in Threats back on: the recorded emails show again. Emails received while it was off are not recorded. | Not needed. |
| Preferences shows Unable to load banner settings, or a change shows Failed to update settings | The settings could not be read or saved: a temporary error, or your administrator role cannot view or change Preferences. | Reload the page after a few moments and try again. | If the message persists. |
| Threats › Banner alerts shows Banner logging is off | Log banner emails in Threats is off (the default). | Click Go to Banners setup and switch Log banner emails in Threats on. Only emails received from then on are recorded. | — |
| A user receives a verdict email about an email they did not report | Log banner emails in Threats is on: the email received an orange or red banner and was logged, then your security team or an automatic sender policy gave it a verdict in Threats. | Nothing is wrong: the email says the message received a warning banner. If you do not want automatic verdicts on logged banner emails, review the automatic resolution of your sender policies in Threats. | — |
| A setting was changed, but emails already received still look the same | Settings apply to new emails only. | Nothing: emails received after the change follow the new setting. | New emails still ignore the change after a few minutes. |