- What it does
- When to use it
- How to activate it
- How to use it
- Settings and controls
- Behind the scenes
- Limits
- If something goes wrong
What it does
The Users page lists every user of your company who can receive Smart Banners. It shows in words whether each mailbox is protected (Active, Inactive, Access error or Can't be activated), and why not. Administrators use it to activate users, retry the mailboxes with an access error, and switch banners off for one user.
Smart Banners › Users: search, Department and Status filters, the bulk button and the Status column · 2026-10
When to use it
- Rolling out in steps: activate a pilot department first, then the rest of the company.
- A user says they get no banners: find them and read their status and the reason under it.
- Checking who is not protected: the warning above the table counts the mailboxes with an access error; filter on them and retry them in one click.
- Following up a rollout: export the list, filtered as you need, as a CSV file.
- Not for: activating new employees automatically every day (that is Auto Engage, in Setup) or activity figures (Dashboard).
How to activate it
The page itself is always available once Smart Banners is set up; activating users is described in How to use it.
Prerequisites
- Smart Banners is set up for your company, and the API Access Setup step of the Setup checklist is complete. Until then every switch and button on this page is greyed out (see If something goes wrong). Setup: Setup › Step 2 — API Access Setup.
Before API Access Setup is complete, the switches, Activate N users and Turn off for everyone are greyed out · 2026-10
- An administrator account with the console permission Smart Banners.
- The users are provisioned in the console. On Google Workspace, every active user of your company in the console is listed. On Microsoft 365, active users with a user mailbox and a licence are listed, and shared mailboxes too.
Microsoft 365: which mailboxes are listed
- Active users with a user mailbox and a Microsoft 365 licence, or whose licence status is unknown.
- Shared mailboxes, unless your company asked to leave them out (see Settings and controls).
- Unlicensed users, only if your company asked for them (see Settings and controls).
- Room, equipment and linked mailboxes, and guest users, are never listed.
How do I turn banners on or off for one user, a department or everyone?
Use the Banner switch for one user, Activate N users for a department or everyone, and Turn off for everyone for the whole company. A department can only be switched off one user at a time.
Turning on: one user, B. How do I activate one user?; a department or everyone not yet active, C. How do I activate a department, or everyone not yet active?
Turning off
- One user: click the switch in the Banner column → the status becomes Deactivating…, then Inactive.
- A department: filter on the department, then switch the users off one by one. There is no bulk switch-off for part of the company.
- The whole company: Turn off for everyone, in the section at the bottom of this page. What it does, and what happens next: Setup › Turning it off and offboarding.
- Undo: yes, activate the user again from this page at any time. Auto Engage never re-activates a user switched off with the switch: Setup › What happens to new users and to users I switched off?
What happens to emails already processed?
Nothing: banners already added to emails are not removed. Only new emails of the users switched off stop receiving banners, within a few minutes.
How to use it
Smart Banners › Users
The page title is Users Banners. One bar above the table holds everything that acts on the list: the search field, the Department and Status filters, the count N users shown, the download icon and one bulk button. Every action and the export apply to exactly the users the filters show, on every page of the table.
A. How do I find a user?
Use the search field and the Department and Status filters above the table.
- Type in the search field (Name, email or department) → the list keeps the users whose first name, last name, email or department contains the text.
- Select a department in Department (default Everyone) → only the users of that department remain.
- Select a status in Status (default All statuses). Each option shows how many users it holds: All statuses, Active, Inactive, Access error, Can't be activated.
The Status filter, with the number of users in each status · 2026-10
Columns: First Name, Last Name, Email, Language, Departments, Status and Banner (the switch). Click a column header to sort by it; Status sorts in the order of the filter. The table shows 10 rows per page by default (10, 50, 100 or 500).
B. How do I activate one user?
Click the switch in the Banner column of the user's row.
- Find the user.
- Click the switch in the Banner column (tooltip Engage mailbox) → the status becomes Activating…, then Active. Banners start appearing in the user's inbox within a few minutes.
C. How do I activate a department, or everyone not yet active?
Filter the list, then click Activate N users: it activates every Inactive user shown, on all pages.
- Filter the list: for a department, select it in Department; for the whole company, leave Everyone.
- Click Activate N users → a confirmation window opens: Activate N users? Banners will start appearing in their inbox within a few minutes.
Confirmation before activating the Inactive users shown · 2026-10
- Click Activate → a message confirms Activation started for N users, and the rows move to Activating…, then Active.
The users activated include those an administrator switched off one by one. Activate N users never includes mailboxes with an access error: the confirmation says so when some are shown, and they are retried as in D. How do I retry the mailboxes with an access error? To keep new employees activated automatically, use Auto Engage: Setup › Step 7 — Engage Company.
D. How do I retry the mailboxes with an access error?
Show them with the warning above the table, fix the cause if the reason calls for it, then click Retry N mailboxes. The warning reads N mailboxes have an access error and are not protected by Smart Banners.
- Click Show them (or select Access error in Status) → the list shows only those mailboxes, each with its reason, and the bulk button becomes Retry N mailboxes.
Status filter on Access error: each row shows its reason, the button becomes Retry N mailboxes · 2026-10
- If the reason calls for it, fix the cause first (see the status table below).
- Click Retry N mailboxes → a confirmation window explains that most access errors are temporary and clear up on retry.
Confirmation before retrying the mailboxes with an access error · 2026-10
- Click Retry → a message confirms Retry started for N mailboxes (and how many were skipped). The retried rows stay in view while they are Activating…: they become Active, or go back to Access error if access still fails, usually because the user left the company.
Mailboxes that Can't be activated are never retried from the console: see the status table.
E. What does the export contain?
A CSV file with exactly the users the filters show, from every page: names, email, language, departments, status and reason, plus a technical Engaged column.
- Filter the list as you need.
- Click the download icon (tooltip Download CSV) → a CSV file named smart-banners-users_ followed by the date and time is downloaded. The icon is greyed out when no user is shown.
The file holds exactly the users shown, from every page, one row per user:
| Column | Content |
|---|---|
| First Name, Last Name, Email, Language | As in the table. |
| Departments | The user's departments, separated by commas. |
| Engaged | The technical status: engaged, engage_started, disengaged, disengage_started or disabled. Kept for files built on the previous export. |
| Status | The status in the same words as the table: Active, Activating…, Inactive, Deactivating…, Access error or Can't be activated. |
| Reason | For Access error and Can't be activated only: the reason shown under the status. |
What do the user statuses mean, and how do I fix them?
Active users are protected. Inactive, Access error and Can't be activated users receive no banners; the table below gives the fix for each case.
A short reason is shown under Access error and Can't be activated. The switch of a user in one of these two statuses is locked. The four statuses at a glance, without the reasons: User statuses.
A user who Can't be activated, with the reason under the status and a locked switch · 2026-10
| Status · reason shown | What it means | How to fix it |
|---|---|---|
| Active | The user's new emails are analysed and can receive banners. | — |
| Activating… · Deactivating… | A change is in progress. The list refreshes by itself until it is done. | Wait a few minutes. |
| Inactive | The user does not receive banners: never activated, or switched off by an administrator. The page does not show which of the two. | Activate the user (B or C). |
| Access error · Mail provider refused access · often temporary | Microsoft 365 or Google Workspace refused access to the mailbox. Usual causes: the user left the company; their mailbox was deleted, suspended, moved on-premises or is over quota; or the permissions granted to Smart Banners were revoked in your Microsoft 365 or Google Workspace admin console. On Google Workspace, also when the Gmail service is turned off for the user. | Check that the user still has an active cloud mailbox (on Google Workspace, with Gmail turned on for them in the Google Admin console) and that Smart Banners is still authorised (Setup, API Access Setup), then Retry (D). |
| Access error · Too many mail filters on this mailbox | The mailbox has more filters than Smart Banners can work with. | Remove some filters from the user's mailbox, then Retry (D). |
| Access error · Temporarily paused by LibraCyber | Our team paused Smart Banners on this mailbox. | Retry (D). If the mailbox goes back to Access error, contact support. |
| Can't be activated · Mail client not supported (Apple Mail) | The user sends email with Apple Mail, which does not display banners correctly. | The user must stop using Apple Mail; then contact support to have the mailbox re-enabled. |
| Can't be activated · Disabled by LibraCyber support | Our team switched Smart Banners off on this mailbox. | Contact support. |
| Can't be activated · Missing Microsoft 365 ID | The user was not provisioned from Microsoft 365, so Smart Banners cannot find their mailbox. | Check that the user exists, with a mailbox, in your Microsoft 365 directory and is provisioned from Microsoft 365 in the console. If you import users by CSV, add their Microsoft 365 user ID in the external_id column. The status clears by itself once the user is provisioned; then activate them. |
| Can't be activated · Unknown reason | The reason could not be identified. | Contact support. |
Settings and controls
All settings on this page apply per user, except Turn off for everyone and the three options on request, which apply to the whole company.
| Setting / control | Default | Effect | Who can change it |
|---|---|---|---|
| Banner switch (per user) | Off, unless the user was activated | Starts or stops banners on the user's new emails. | Admin |
| Activate N users | — | With confirmation. Activates every Inactive user the filters show, on all pages. | Admin |
| Retry N mailboxes (filter Access error) | — | With confirmation. Reconnects every mailbox with an access error the filters show. | Admin |
| Search · Department · Status | Empty · Everyone · All statuses | Filter the list by free text, department or one of the five statuses; actions and export follow the filters. | Admin |
| Download CSV | — | Exports the users shown as a CSV file (E. What does the export contain?). | Admin |
| Turn off for everyone | — | With confirmation. Stops banners for the whole company and turns Auto Engage off. See Setup › Turning it off and offboarding. | Admin |
| Auto Engage | Off | Activates the users not active yet, once a day. Set in Setup › Step 7 — Engage Company. | Admin |
| List Microsoft 365 shared mailboxes | On | Shared mailboxes appear in the list and can be activated. Also applies to phishing simulations. | LibraCyber support, on request |
| List Microsoft 365 users without a licence | Off | Unlicensed users appear in the list and can be activated. Also applies to phishing simulations. | LibraCyber support, on request |
| Re-enable a mailbox that Can't be activated | — | Makes the mailbox Inactive again, so it can be activated, once the cause is fixed. | LibraCyber support, on request |
Behind the scenes
- Activating a user: Smart Banners connects to the mailbox; banners appear on new emails within a few minutes. The first time a mailbox is activated, its past email is also read once in the background: see Overview › How it works.
- Access errors: when Microsoft 365 or Google Workspace keeps refusing access to a mailbox, the user moves to Access error by themselves and stops receiving banners. Nobody is notified: the warning above the table is where it shows.
- Data refresh: statuses are read each time the page opens. While a row is Activating… or Deactivating…, the list refreshes every few seconds until it settles. New employees appear once they are provisioned in the console: with automatic user provisioning, after the next nightly synchronisation.
- Microsoft 365 and Google Workspace: the page works the same way. Missing Microsoft 365 ID exists only on Microsoft 365.
Limits
- No bulk switch-off for part of the company: switch users off one by one, or turn off for everyone (as of 20/10/2026).
- The page does not tell whether an Inactive user was never activated or was switched off by an administrator (as of 20/10/2026).
- Mailboxes that Can't be activated cannot be re-enabled from the console: contact support (as of 20/10/2026).
- The list cannot be imported: users come from user provisioning in the console (as of 20/10/2026).
- Users whose email address is on a reserved domain such as
.localcannot be activated: Smart Banners only works with real, routable email addresses (as of 21/10/2026). - Users who are not listed (see How to activate it) cannot receive banners. What the whole product does not cover: Overview › What is not covered.
If something goes wrong
| Symptom | Likely cause | What the customer can do | When to contact support |
|---|---|---|---|
| Every switch and button on the Users page is greyed out | Smart Banners setup is not finished: the permissions in the API Access Setup step are not granted. The tooltip reads Banners Setup not finished: permissions not Granted. | Complete API Access Setup in the Setup checklist. | The step shows as complete but the page stays greyed out. |
| A user shows Access error | Microsoft 365 or Google Workspace refused access to the mailbox (see the reason under the status). | Apply the fix for that reason in the status table, then Retry. | The mailbox goes back to Access error although the user still has an active mailbox and Smart Banners is still authorised. |
| Many users moved to Access error at the same time | The permissions granted to Smart Banners in your Microsoft 365 or Google Workspace tenant were changed or revoked. | Restore the authorisation (Setup, API Access Setup), then retry the mailboxes (D). | The retried mailboxes go back to Access error. |
| A user shows Can't be activated and the switch is locked | See the reason under the status. | Apply the fix for that reason in the status table. | Always for Mail client not supported (Apple Mail), Disabled by LibraCyber support and Unknown reason. |
| A warning says N mailboxes have an access error and are not protected by Smart Banners. | Some of your users are in Access error and receive no banners. | Click Show them, apply the fix for each reason in the status table, then click Retry N mailboxes (D). | The retried mailboxes go back to Access error although the users still have an active mailbox. |
| After Retry, some mailboxes go back to Access error | Access is still refused, usually because the user has left the company. | If the user has left the company, nothing more is needed. Otherwise apply the fix for the reason shown in the status table. | The user still has an active mailbox and Smart Banners is still authorised. |
| A user stays on Activating…, or goes back to Inactive after I activate them | The activation did not complete. | Wait a few minutes, then activate the user once more. | The second attempt fails too. |
| A user is missing from the Users list | The user is not provisioned or not active in the console; on Microsoft 365, the mailbox is not a user mailbox (room, equipment, guest), the user has no licence, or shared mailboxes are left out for your company. | Check the user in the console's user provisioning and in your Microsoft 365 or Google Workspace directory. | The user is active, licensed and has a user mailbox, but is still missing the day after the next synchronisation. |
| A user I switched off was activated again | Someone used Activate N users with that user in the list. | Switch the user off again with their own switch. | — |