- What it does
- When to use it
- How to activate it
- How to use it
- Settings and controls
- Behind the scenes
- Limits
- If something goes wrong
What it does
The Safe List lets administrators switch banners off for chosen senders and domains: emails from a sender or domain on the list never receive a banner, for every user of the company.
The Safe List, Safe domains tab: each entry shows who added it and when, with a bin to remove it · Smart Banners › Setup › Safe List · 2026-10-20
When to use it
- A known partner or supplier keeps receiving warning banners that your users don't need.
- Many users have already marked the same sender as safe, and you want to trust it for everyone (start from Senders marked as safe by users).
- A service you use sends emails through a mailing platform, and those emails keep receiving banners.
- You trusted a sender by mistake, or no longer trust it, and want its emails analysed again.
Not for: your own company domains — they are listed in Domains in Preferences. Senders trusted by a single user — see Senders marked as safe by users. Letting phishing simulation emails through your mail system — see Behind the scenes › What is the difference from Threats sender policies?
How to activate it
The Safe List is always available once Smart Banners is set up (see Setup). The list is empty until an administrator adds an entry.
Prerequisites
- An administrator account that can open the Smart Banners menu. Every administrator who can open it can add and remove entries.
Turning it off
- To stop trusting a sender or domain, remove its entry (C. How do I remove an entry?). Emails received after that are analysed again and can receive banners.
- Removing an entry cannot be undone: to trust the sender again, add it again.
- Users who had marked that sender as safe themselves keep trusting it, and the sender shows again in Senders marked as safe by users.
How to use it
Smart Banners › Setup › Safe List
The Safe lists card has two tabs: Safe domains (shown first) and Safe senders (individual email addresses). Each tab lists its entries with Item, Type, Added By, Added to list (date) and Action. Use Search to find an entry.
A. How do I add domains or senders?
Open the Safe domains or Safe senders tab, select Add safe domains or Add safe senders, and paste one item per line.
- Open Smart Banners › Setup and select the Safe List tab.
- Select the Safe domains or the Safe senders tab.
The Safe senders tab lists individual addresses, with the same columns as Safe domains · Smart Banners › Setup › Safe List · 2026-10-20
- Select Add safe domains (or Add safe senders). → A dialog asks you to put each item on a line.
- Type or paste one domain (for example
example.com) or one email address per line. You can add several at once.The add dialog takes one domain per line · Smart Banners › Setup › Safe List › Add safe domains · 2026-10-20
- Select Confirm. → The message Item(s) added to safe lists. appears and the entries are listed, with your email in Added By. If a line is not a valid domain or address, the dialog shows an error and nothing is saved: correct the line and confirm again.
B. How do I add a sender or domain that users have already trusted?
Start from Senders marked as safe by users: each sender you add there leaves that screen and appears here.
C. How do I remove an entry?
Select the bin on the entry's row and confirm. Entries are removed one at a time.
- On the entry's row, select the bin in the Action column. → The Delete item dialog opens.
- Select Confirm. → The entry disappears from the list. Select Cancel to keep it.
The Delete item dialog: Confirm removes the entry, Cancel keeps it · Smart Banners › Setup › Safe List · 2026-10-20
D. Who added an entry?
The Added By column always shows who first created the entry, not who last changed it.
| Shown value | When it appears |
|---|---|
| An administrator's email | One of your administrators created the entry. |
| Team LibraCyber | LibraCyber created the entry on your behalf, or a user had reported an email from that sender or domain before it was added: the entry keeps its first creator. |
| Former employee | The author's account was replaced by a former-employee placeholder, so the original author is no longer shown. |
| Unknown | The account that created the entry no longer exists. |
Export: the Safe List cannot be exported or imported from a file; to add many entries, paste them one per line in the add dialog.
Settings and controls
The Safe List is company-wide. A sender on the Safe List gets no banner even if no user ever marked it as safe.
| Setting / control | Default | Effect | Who can change it |
|---|---|---|---|
| Safe domains | Empty list | One domain per entry. Emails from any address of this domain and of its subdomains never receive a banner, for every user. | Admin |
| Safe senders | Empty list | One email address per entry. Emails from this address never receive a banner, for every user. | Admin |
| Search | Empty | Filters the entries of the open tab by free text. | Admin |
| Bin in Action | — | Removes the entry after confirmation; new emails from that sender are analysed again. | Admin |
| Added By column | — | Read-only. Shows who first created the entry (see D. Who added an entry?). | — |
Behind the scenes
An email from a sender or domain on the Safe List receives no banner at all. Smart Banners checks the list before building every banner.
- Before building a banner, Smart Banners checks the sender of the email against the Safe List.
- If the sender address, or its domain, is on the list, the email receives no banner at all — no warning and no grey informative banner.
- A domain entry covers its subdomains (
mail.example.comis covered byexample.com), but not other domains of the same organisation (example.fris not covered byexample.com). - Emails sent through a mailing platform (newsletters, notification services) can carry more than one sender address: the visible sender and the address of the platform that sent it on its behalf. The email skips the banner only if every sender address is trusted.
- Trusting a whole domain also means that a fraudulent email genuinely sent from that domain (for example from a compromised mailbox) is no longer flagged. Prefer a single sender when you only trust one address.
- The Safe List trusts the address or domain as written: it does not check SPF, DKIM or DMARC, and an entry cannot be made conditional on them. An email that forges a safe-listed address or domain receives no banner either, so make sure the domains you trust publish SPF, DKIM and a DMARC policy that rejects or quarantines forged mail.
Data refresh: an added or removed entry applies from the next email received. Emails already in mailboxes keep the banner they received. The same behaviour applies to Microsoft 365 and Google Workspace.
What is the difference from Threats sender policies?
They are the same list. The Safe List and the safe sender policies in Threats › Sender policies — sometimes called the "phishing whitelist" — are one list, shown in two consoles.
- If your administrators also use Threats, every Safe List entry is also a safe sender policy in Threats › Sender policies. A sender policy created in Threats as safe, with Deactivate banners on future emails ticked, shows here.
- Adding a sender that already has a policy in Threats (for example a blocked sender) turns that policy into a safe one. Removing an entry here removes the policy from Threats too.
- In Threats › Sender policies, the Allow action is available only while Smart Banners is active for your company. Otherwise it is greyed out with This action requires Smart Banners to be enabled for your company.
- A more specific rule wins: if Threats has a policy for the exact address, or for a subdomain, that blocks or flags it, that policy wins over a safe domain.
Allowing phishing simulations through your mail system is a different setting, also sometimes called a "phishing whitelist". It is part of the Phishing Simulation setup. LibraCyber simulation emails never receive a banner and do not need to be on the Safe List. Simulations from other providers are analysed like any other email (see If something goes wrong).
Limits
- Each entry is one sender address or one domain; related domains of the same organisation must be added one by one (as of 20/10/2026).
- Entries are removed one at a time (as of 20/10/2026).
- The list cannot be exported or imported from a file (as of 20/10/2026).
- Adding or removing an entry does not change banners already delivered (as of 20/10/2026).
- An entry cannot depend on SPF, DKIM or DMARC passing (as of 21/10/2026).
If something goes wrong
| Symptom | Likely cause | What the customer can do | When to contact support |
|---|---|---|---|
| A sender on the Safe List still receives banners | The email was sent through a mailing platform and carries a second sender address that is not on the Safe List. | Add the platform's sending address too (or ask support which address to add). | If banners continue: send support an example email with its full headers. |
| A partner's emails still receive banners although I added their domain | The partner also sends from another domain (for example a different extension), or a policy in Threats for that address or subdomain takes precedence. | Check the sender address on the bannered email and add that domain. Check Threats › Sender policies for a policy on that address. | If the sender's domain is already on the list and no Threats policy applies. |
| Added By shows Team LibraCyber for an entry I created | A user had reported an email from that sender or domain before you added it: the entry keeps its first creator. | Nothing: the entry works normally. | Not needed. |
| A sender I blocked in Threats is now safe | The sender, or its domain, was added to the Safe List: that turns the Threats policy into a safe one. | Remove the entry from the Safe List, then block the sender again in Threats › Sender policies. | Not needed. |
| Phishing simulations from another provider receive banners | Smart Banners recognises the phishing simulations sent by LibraCyber; simulations from other providers are analysed like any other email. | If you don't want banners on these simulations, add the provider's sending domain or address to the Safe List. | — |
| Adding entries to the Safe List fails with Items must be domains | At least one line is not a valid domain, so nothing was saved. | Correct or remove the line, then select Confirm again. | — |