- Quick checks
- The banner does not appear
- The banner appears late
- The banner appears on legitimate emails
- Signed emails
- Activation and access problems
- Setup problems
- Smart Banners is unavailable
- User actions: Report email and Mark as safe
- How emails look in Outlook and Gmail
- Dashboard figures
- Preferences, safe lists and Threats
- What to send to support
Start with the quick checks: they solve most problems. If they don't, find your situation below. Each table gives the likely cause and the first thing to do, with a link to the full fix.
Quick checks
Do these five checks before anything else: together they solve most problems.
- The user is Active. In Smart Banners › Users, the user's Status is Active. Users who are Inactive, in Access error or Can't be activated receive no banners; the reason is shown under the status. What each status means and how to fix it: Users › What do the user statuses mean, and how do I fix them? The four statuses at a glance: User statuses.
- The access to your mailboxes is still granted. Open Smart Banners › Setup and click Test deployment in Test Deployment: you should receive a test email with a green banner. If you don't, the access granted to Smart Banners in your Microsoft 365 or Google Workspace tenant is missing or was removed: see Setup.
- The email arrived after the user was activated. Banners are added only to new emails. Emails already in the mailbox never receive one.
- The sender is not trusted. Senders on your company safe list, senders the user marked as safe, and (when Trust internal colleagues is on) your colleagues never receive a banner. Company safe list: Safe list.
- The email is of a kind Smart Banners analyses. Some emails are never analysed, for example calendar invitations, encrypted emails, and on Google Workspace emails in Spam or larger than 10 MB. The full list: Overview › What is not covered.
Smart Banners › Users: the Status column and the reason shown under a user in Access error
For a one-line answer to the questions customers ask most, see Quick answers.
The banner does not appear
Most often the user is not Active, the access to your tenant was removed, or the sender is trusted. The checks under each symptom find which.
| Symptom | Why | What to do |
|---|---|---|
| No user receives any banner | Users are not activated, the access to your tenant is missing or was removed, or the service is interrupted. | Open Smart Banners › Users and look at the Status filter → No user receives any banner: what should I check?, below |
| One user receives no banners | The user is not Active, their mailbox has an access problem at Microsoft or Google, or their emails are trusted or not analysed. | Search for the user and read the Status → One user receives no banners: what should I check?, below |
| An email looks suspicious but has no banner | The sender is trusted, the email is of a kind Smart Banners does not analyse, the user is not Active, or the only warning signs are too weak to show a banner on their own. | Check that the user is Active → An email looks suspicious but has no banner: what should I check?, below |
No user receives any banner: what should I check?
- Open Smart Banners. If every section shows a presentation page, Smart Banners is not activated for your company yet: see Setup.
- Open Smart Banners › Users and look at the Status filter. If your users are Inactive, activate them (Activate N users) or turn on Enable Auto Engage in Smart Banners › Setup › Engage Company: see Users.
- If the switches on the Users screen are greyed out with the tooltip Banners Setup not finished: permissions not Granted, the consent has not been granted: complete API Access Setup in Setup.
- If the warning N mailboxes have an access error and are not protected by Smart Banners. is shown, click Show them, then Retry N mailboxes.
- Check that the access is still granted in your tenant: on Microsoft 365, the consent to LibraCyber Banners in Microsoft Entra; on Google Workspace, the Smart Banners service account in domain-wide delegation. Someone in your IT team may have removed it. Then run Test deployment in Smart Banners › Setup and check that the test email arrives with a green banner.
- If the test email arrives with its banner but users still see none, check that the emails are not trusted. Look for an entry for a whole domain on the safe list, or Trust internal colleagues for emails between colleagues.
- If nothing above explains it, contact support with the information in What to send to support, below.
One user receives no banners: what should I check?
- In Smart Banners › Users, search for the user and read the Status. Inactive: switch the user on. Access error or Can't be activated: follow the reason shown under the status, as explained in Users › What do the user statuses mean, and how do I fix them?
- If the user is Active, check when they were activated: only emails received afterwards get a banner.
- Ask the user whether they clicked Mark as safe for that sender, and check that the sender is not on your company safe list.
- Check whether anything changed on that mailbox at Microsoft or Google. For example: mailbox deleted or converted, licence removed, mailbox full, mailbox moved to an on-premises server, account suspended, or a policy that limits which mailboxes applications can access. These stop Smart Banners, and in some cases the user still shows as Active.
- On Google Workspace, check whether the user sends email with Apple Mail: it is not supported.
- If the user is Active and nothing above applies, contact support with the information in What to send to support, below. Mention that the user shows as Active.
An email looks suspicious but has no banner: what should I check?
- Check that the user is Active and that the email arrived after the user was activated.
- Check whether the sender is trusted. A sender gets no banner at all when it is on your company safe list or the user marked it as safe. The same applies to colleagues when Trust internal colleagues is on, and to people the user already writes to and receives from regularly.
- Check whether the email is of a kind Smart Banners does not analyse: see Overview › What is not covered. Examples are a calendar invitation, an encrypted email, or on Google Workspace an email in Spam or larger than 10 MB.
- Some warning signs are too weak to show a banner on their own, for example financial or password-related words, or a reply address different from the sender's. They are listed in a banner only when a stronger sign is also found. An email with only these signs gets no banner, by design.
- If none of these explains it, send the email to support as a possible missed detection, with the information in What to send to support, below. If the email is dangerous, also report it through your usual reporting channel.
The banner appears late
Banners are added after the email arrives. On Google Workspace, new emails wait outside the inbox until they are analysed; contact support if they wait more than 15 minutes.
| Symptom | Why | What to do |
|---|---|---|
| Banners appear late, or on Google Workspace new emails take a few minutes to reach the inbox | The banner is added after the email has arrived; on Google Workspace, new emails wait outside the inbox until they are analysed. | Note two or three examples with the time the email arrived → Banners or emails arrive late: what should I check?, below |
| Gmail: new emails reach the inbox a few minutes late, or sit under Mantra/Processing | Emails wait for analysis; if it fails they are released without a banner after a few minutes. | Wait a few minutes → Banners and user actions › If something goes wrong |
Banners or emails arrive late: what should I check?
Smart Banners adds the banner after the email has reached the mailbox. How long it usually takes: Overview › How long it takes.
- Microsoft 365: the email is visible straight away and the banner appears on it shortly after. While this happens, an email the user is reading may briefly disappear and come back.
- Google Workspace: new emails wait outside the inbox, under the label Mantra/Processing, until they are analysed. If the analysis does not finish within a few minutes, the email is released to the inbox without a banner, so it is never held for long.
What to check:
- Is it every user, or one user? For one user, see One user receives no banners: what should I check?, under The banner does not appear.
- Is it every email, or only some periods of the day? Note two or three examples with the time the email arrived and the time the banner appeared (or the time the email reached the inbox).
- On Google Workspace, if emails stay under Mantra/Processing for more than 15 minutes, contact support straight away.
- If delays are frequent, contact support with the examples from step 2.
The banner appears on legitimate emails
Usually the sender writes to this user for the first time, or its name or address resembles a colleague, your company or a known brand. Mark as safe stops banners for one user; the Safe List stops them for everyone.
| Symptom | Why | What to do |
|---|---|---|
| An email from a colleague shows a red banner | The sender's name exactly matches a colleague's but the email comes from another address, for example a personal mailbox or an external tool sending on their behalf. | Check with the colleague by another channel before acting on the email → Banners and user actions › If something goes wrong |
| An email from a known partner shows a grey banner | The address is new to this user (first email from it), or the partner's domain was created recently. The line "sent from … and not from …" only adds detail and never sets the colour. | To stop banners from that sender, the user selects Mark as safe → Banners and user actions › If something goes wrong |
| A grey banner says the sender "has the same name as you" | Someone wrote with the user's own name from another address, possibly the user's own personal mailbox. | If the user sent it, mark the address as safe → Banners and user actions › If something goes wrong |
| A sender I trust still gets a banner | The sender was marked as safe by one user only, is not in the company safe list with that exact address or domain, or the email has several senders and not all are trusted. | Add the sender or its domain to the company Safe List → Banners and user actions › If something goes wrong |
| An orange banner says a brand "doesn't usually send emails from" an address the user trusts | The sender's address is not among the addresses Smart Banners knows for that brand. | If the sender is legitimate, the user selects Mark as safe → Banners and user actions › If something goes wrong |
| A grey banner says a known sender is "writing to you for the first time", especially in the first days or after a user was switched off and on | Past emails are read only when a mailbox is first activated, and emails exchanged while a user was inactive are not recorded. | Nothing: the next emails from that sender no longer carry this line → Banners and user actions › If something goes wrong |
| A banner line says the reply address is different from the sender's | Replies would go to another address; this line is shown only together with another warning sign. | Read the other lines of the banner: they say why it appeared → Banners and user actions › If something goes wrong |
| Phishing simulations from another provider receive banners | Smart Banners recognises the phishing simulations sent by LibraCyber; simulations from other providers are analysed like any other email. | Add the provider's sending domain or address to the Safe List → Safe list › If something goes wrong |
| Emails from one of our own domains are flagged as external | The domain is missing from Domains in Preferences. | Check Domains in Smart Banners › Setup › Preferences → Preferences › If something goes wrong |
| Users receive banners on emails from colleagues | Trust internal colleagues is off, or the colleague writes from a domain that is not in Domains. | Turn Trust internal colleagues on → Preferences › If something goes wrong |
| A sender on the Safe List still receives banners | The email was sent through a mailing platform and carries a second sender address that is not on the Safe List. | Add the platform's sending address too → Safe list › If something goes wrong |
| A partner's emails still receive banners although I added their domain | The partner also sends from another domain (for example a different extension), or a policy in Threats for that address or subdomain takes precedence. | Check the sender address on the bannered email and add that domain → Safe list › If something goes wrong |
Signed emails
A digitally signed email (S/MIME or PGP) can show its signature as not valid, or its sender as not verified, once Smart Banners has analysed it. Smart Banners writes into every email it analyses (on Gmail it replaces the email with a copy), so the content may no longer match the signature. Encrypted emails are not analysed, so they are not affected.
No setting excludes signed emails today. Contact support with the original signed email (What to send to support, below).
Activation and access problems
The reason shown under the user's status says what went wrong, and the status table of the Users page gives the fix for each reason.
| Symptom | Why | What to do |
|---|---|---|
| A user shows Access error | Microsoft 365 or Google Workspace refused access to the mailbox (see the reason under the status). | Apply the fix for that reason in the status table → Users › What do the user statuses mean, and how do I fix them? |
| A user shows Can't be activated and the switch is locked | See the reason under the status. | Apply the fix for that reason in the status table → Users › What do the user statuses mean, and how do I fix them? |
| Every switch and button on the Users page is greyed out | Smart Banners setup is not finished: the permissions in the API Access Setup step are not granted. The tooltip reads Banners Setup not finished: permissions not Granted. | Complete API Access Setup in the Setup checklist → Users › If something goes wrong |
| Many users moved to Access error at the same time | The permissions granted to Smart Banners in your Microsoft 365 or Google Workspace tenant were changed or revoked. | Restore the authorisation (Setup, API Access Setup), then retry the mailboxes → Users › If something goes wrong |
| A warning says N mailboxes have an access error and are not protected by Smart Banners. | Some of your users are in Access error and receive no banners. | Click Show them, apply the fix for each reason → Users › If something goes wrong |
| After Retry, some mailboxes go back to Access error | Access is still refused, usually because the user has left the company. | If the user has left the company, nothing more is needed → Users › If something goes wrong |
| A user stays on Activating…, or goes back to Inactive after I activate them | The activation did not complete. | Wait a few minutes, then activate the user once more → Users › If something goes wrong |
| A user is missing from the Users list | The user is not provisioned or not active in the console; on Microsoft 365, the mailbox is not a user mailbox (room, equipment, guest), the user has no licence, or shared mailboxes are left out for your company. | Check the user in the console's user provisioning → Users › If something goes wrong |
| A user I switched off was activated again | Someone used Activate N users with that user in the list. | Switch the user off again with their own switch → Users › If something goes wrong |
| Microsoft 365, users imported by CSV show Can't be activated · Missing Microsoft 365 ID | The CSV file has no Microsoft 365 user ID for these users. | Add the external_id column to your CSV file and import it again → Setup › Setup troubleshooting
|
| New users are not activated automatically | Enable Auto Engage is off, the first daily run has not happened yet (the next morning, at about 10:00 UTC), or the users were switched off by hand; users who Can't be activated are skipped too. | Check Enable Auto Engage in step 7 → Setup › Setup troubleshooting |
| After Turn off for everyone, users are active again | Enable Auto Engage was switched back on, so the next daily run activated again everyone who had not been switched off one by one. | Switch Enable Auto Engage off, then use Turn off for everyone again → Setup › Setup troubleshooting |
Setup problems
Setup problems are fixed in the Setup page. Each row names the message you see in Smart Banners › Setup and its cause.
| Symptom | Why | What to do |
|---|---|---|
| Every Smart Banners section shows a presentation page | Smart Banners is not activated for your company yet, or not included in your plan. | Contact support right away, or ask your account manager → Setup › Setup troubleshooting |
| Smart Banners › Setup shows Unable to load banner setup | On Microsoft 365, the Smart Banners consent has never been granted for your tenant; otherwise a temporary error. | On Microsoft 365, click Go to user provisioning settings → Setup › Setup troubleshooting |
| Company Setup shows a warning | The setup on LibraCyber's side is not finished. | Contact support right away → Setup › Setup troubleshooting |
| API Access Setup shows Not connected (Microsoft 365) | The consent that lets Smart Banners process your emails was not granted, not completed by a Global Administrator, or was removed. | Grant it again with a Global Administrator account → Setup › Setup troubleshooting |
| No Grant Consent button in the consent dialog | You are working on a company other than your own (for example as an MSP). | Use Copy link and send the link to the company's Global Administrator → Setup › Setup troubleshooting |
| API Access Setup shows User Service Account not setup (Google Workspace) | LibraCyber has not created your Smart Banners service account yet. | Contact support right away → Setup › Setup troubleshooting |
| API Access Setup stays red although the Google guide was followed | The confirmation is not ticked. | Tick I confirm I have given access to the service account. → Setup › Setup troubleshooting |
| Test deployment is greyed out with Not available in MSP mode | You are working on the company from the MSP Portal: the test can only be run from the company's own console. | Ask an administrator of the company to run the step → Setup › Setup troubleshooting |
| No test email, or a test email without the green banner | You are not Active yourself, the access of step 2 is incomplete, or the test email was not delivered. | Follow What if I don't receive the green banner? in step 3 → Setup › Setup troubleshooting |
| Run historical analysis shows You cannot select more than 100 users | An analysis covers at most 100 users. | Run several analyses → Setup › Setup troubleshooting |
| Safe Lists opens the Preferences tab | Known behaviour of the button. | Open the Safe List tab → Setup › Setup troubleshooting |
| Send sample emails fails or warns about a missing CEO | A CEO scenario is selected and no CEO is set in General Settings › Company Scan › Key People: the step shows To use this feature, the Key People must be filled out. | Set a CEO linked to a provisioned email address → Setup › Setup troubleshooting |
| Some users cannot be selected as targets in Send sample emails | Only Active users can receive sample emails. | Activate the users in Smart Banners › Users → Setup › Setup troubleshooting |
| A sample email arrives without the expected banner | Some samples occasionally arrive without their banner. | Send the sample again to the same user → Setup › Setup troubleshooting |
Smart Banners is unavailable
An interruption never stops or loses email: emails are delivered without banners until the service is back. Smart Banners works on emails that are already in your users' mailboxes.
- Emails received during the interruption are delivered normally and can arrive without a banner.
- Google Workspace: the few emails that were being analysed when the interruption started can stay under the label Mantra/Processing until the service is back; they then return to the inbox. Users missing a recent email can find it under that label.
- Microsoft 365: the few emails that were being updated at that moment can stay in the folder Mantra-Processed until the service is back; they then return to their folder.
Smart Banners also depends on your mail provider: if Microsoft 365 or Google Workspace has an outage, emails arrive as the provider delivers them, but Smart Banners cannot add banners until the provider is back.
What to do: nothing to change in the console, and do not remove the access granted to Smart Banners in your tenant. Incidents and their resolution are announced on the LibraCyber status page. If you think the service is down and nothing is announced there, contact support.
User actions: Report email and Mark as safe
A button can be hidden by your settings or on shared mailboxes, and a report reaches Threats only when Threats is switched on for your company and the email is not very large.
| Symptom | Why | What to do |
|---|---|---|
| The Report email or Mark as safe button is missing | The button is hidden in Preferences; the mailbox is a shared mailbox; or, for Mark as safe only, the email has several senders. | Switch the button back on in Preferences → Banners and user actions › If something goes wrong |
| Emails without any warning show only a Report email button | Show report button within safe email is on for your company. | Switch Show report button within safe email off in Preferences → Banners and user actions › If something goes wrong |
| The report button only is missing on some Gmail emails | Emails with attachments that need no banner are not changed on Gmail. | Nothing: expected behaviour → Banners and user actions › If something goes wrong |
| A user selected Report email but the email is not in Threats | Threats is switched off for your company, or the user did not finish signing in. | Check that Threats is enabled, and ask the user to report again → Banners and user actions › If something goes wrong |
| A user reported a very large email, but it is not in Threats | Very large emails, usually with large attachments, cannot be reported, even though the confirmation appears. | Forward the email to your security team instead → Banners and user actions › If something goes wrong |
| A user marked a suspicious sender as safe by mistake | Mark as safe applies at once for that user, and administrators cannot undo it. | Do not add that sender to the Safe List → Senders marked as safe by users › If something goes wrong |
| A banner appears in a reply or a forward | The banner is part of the original email and is quoted with it. | Delete it from the quoted text before sending → Banners and user actions › If something goes wrong |
| A user wants to remove the banner from an email they received | The banner is part of the received email. Only classic Outlook for Windows lets a user edit a received email. | In classic Outlook for Windows, use Edit Message and delete it → Banners and user actions › If something goes wrong |
How emails look in Outlook and Gmail
Smart Banners writes the banner into the email, so a few visible changes in Outlook and Gmail are expected and harmless.
| Symptom | Why | What to do |
|---|---|---|
| The layout of an email looks broken after the banner was added | The banner is inserted at the top of the email body, and a few complex layouts may not display it correctly. | Contact support with the original email → What to send to support, below |
| A green banner Banners deployed successfully on an email | The email is a Smart Banners test email. | Nothing: it confirms that banners work → Banners and user actions › If something goes wrong |
| The banner is in the wrong language | The user's language in LibraCyber is different, or not one of the supported languages. | Check the Language column in Users → Banners and user actions › If something goes wrong |
| Gmail: a copy of the email is in Trash, or Gmail says a message was deleted | The email was replaced by a copy, carrying the banner when there is one. | Nothing: expected behaviour → Banners and user actions › If something goes wrong |
| Gmail: users see the labels Mantra/Processing and Mantra/Reviewed under More | Smart Banners uses these labels to hold new emails while it analyses them and to mark them as analysed. | Nothing: they are expected while Smart Banners is active → Banners and user actions › If something goes wrong |
| Gmail: the user gets two notifications for the same email | The email is replaced by a copy after analysis, and Gmail notifies the copy as a new email. | Nothing: expected behaviour → Banners and user actions › If something goes wrong |
| Outlook: an email disappears for a moment and reappears; a Mantra-Processed folder appeared | Outlook is made to refresh so the banner shows straight away. | Nothing: expected behaviour → Banners and user actions › If something goes wrong |
| Outlook: a plain-text email now looks different | Analysed plain-text emails are shown as formatted text. | Nothing: the content is unchanged → Banners and user actions › If something goes wrong |
| On Microsoft 365, emails in the Junk Email folder have banners | On Microsoft 365, Smart Banners analyses the emails of every folder, Junk Email included. | Nothing: expected behaviour on Microsoft 365 → Overview › How it works |
Dashboard figures
The Dashboard stops at yesterday and counts only Active users, which explains most unexpected figures.
| Symptom | Why | What to do |
|---|---|---|
| The Dashboard shows zero right after I activated users | The figures stop at yesterday, so the first activity appears the day after activation; and only users with status Active are covered. | Wait until the next day → Dashboard › If something goes wrong |
| Today's emails do not appear on the Dashboard | By design, the figures stop at yesterday. | Nothing: they appear tomorrow → Dashboard › If something goes wrong |
| Emails processed or Banners added is higher than the emails received | The figures count analyses: an email analysed again, for example after a temporary error, is counted again. | Nothing: the difference is usually a few percent → Dashboard › If something goes wrong |
| Mailboxes monitored does not change when I change the timeframe | By design, this figure always shows the current number of protected mailboxes. | Nothing to do: it works as designed → Dashboard › If something goes wrong |
| Mailboxes monitored is lower than the number of users in my company | Only users with status Active are counted: Inactive, Access error, Can't be activated and users still Activating… are not. | Check the statuses in Users, activate the missing users → Dashboard › If something goes wrong |
| Banners added is lower than the banners my users see | The Report button only banner on safe emails and the Setup test email are not counted as banners. | Nothing to do: these two are not counted, by design → Dashboard › If something goes wrong |
| The Dashboard does not load, or shows zero while banners keep appearing in emails | A service problem on our side. | Contact LibraCyber support → Dashboard › If something goes wrong |
| The Dashboard has no Max option | Max is offered only when your company ran its first phishing simulation more than 12 months ago. | Nothing: choose 12 Months for the longest period → Dashboard › If something goes wrong |
Preferences, safe lists and Threats
Settings and lists apply to new emails only, and the Safe List is shared with Threats. These two facts explain most surprises here.
| Symptom | Why | What to do |
|---|---|---|
| Preferences shows Unable to load banner settings, or a change shows Failed to update settings | The settings could not be read or saved: a temporary error, or your administrator role cannot view or change Preferences. | Reload the page after a few moments and try again → Preferences › If something goes wrong |
| I turned on Log banner emails in Threats but no banner email appears in Threats | Only emails received after activation are recorded, and only those with an orange or red banner. | Wait for a new email with an orange or red banner → Preferences › If something goes wrong |
| Banner emails disappeared from Threats | Log banner emails in Threats was turned off: recorded banner emails are hidden while it is off. | Turn Log banner emails in Threats back on → Preferences › If something goes wrong |
| Threats › Banner alerts shows Banner logging is off | Log banner emails in Threats is off (the default). | Switch Log banner emails in Threats on → Preferences › If something goes wrong |
| A setting was changed, but emails already received still look the same | Settings apply to new emails only. | Nothing: emails received after the change follow the new setting → Preferences › If something goes wrong |
| A user receives a verdict email about an email they did not report | Log banner emails in Threats is on: the email received an orange or red banner and was logged, then your security team or an automatic sender policy gave it a verdict in Threats. | Nothing is wrong: the email says the message received a warning banner → Preferences › If something goes wrong |
| Added By shows Team LibraCyber for an entry I created | A user had reported an email from that sender or domain before you added it: the entry keeps its first creator. | Nothing: the entry works normally → Safe list › If something goes wrong |
| A sender I blocked in Threats is now safe | The sender, or its domain, was added to the Safe List: that turns the Threats policy into a safe one. | Remove the entry from the Safe List, then block the sender again → Safe list › If something goes wrong |
| Adding entries to the Safe List fails with Items must be domains | At least one line is not a valid domain, so nothing was saved. | Correct or remove the line, then select Confirm again → Safe list › If something goes wrong |
| A sender stays in Senders marked as safe by users although its domain is on the Safe List | The sender writes from a subdomain or a different domain from the one on the Safe List (for example mail.example.com vs example.com). |
Nothing is needed if the Safe List domain covers it → Senders marked as safe by users › If something goes wrong |
| I can't remove a sender from Senders marked as safe by users | Entries leave the list only when they are added to the Safe List. | Leave the entry: it only affects the users who marked it → Senders marked as safe by users › If something goes wrong |
| A sender came back to Senders marked as safe by users | Its entry was removed from the Safe List; the users who marked it still trust it. | Add it to the Safe List again → Senders marked as safe by users › If something goes wrong |
| A sender a user marked as safe is not listed in Senders marked as safe by users | Senders already on your company Safe List are not shown here: everybody already trusts them. | Nothing: check the entry in the Safe List → Senders marked as safe by users › If something goes wrong |
What to send to support
So that the first reply is an answer, not a question, send:
- Your company and your provider (Microsoft 365 or Google Workspace).
- The users affected, by email address, and whether it is one user, some or all. For each, the Status and the reason shown in Smart Banners › Users: a screenshot, or the file from Download CSV with the filter set to those users.
- For a problem with a specific email: the original email, saved as a file and attached (in Gmail: Show original › Download original; in Outlook: save or download the message). Do not forward it: forwarding changes the information support needs. Add the date and time it was received, the sender and the subject, and a screenshot of the banner as the user sees it.
- For a setup problem: a screenshot of Smart Banners › Setup showing the step and its message.
- When it started, and anything that changed around that time in your Microsoft 365 or Google Workspace tenant: consent or delegation, application access policies, licences, mailbox migrations, or users who left.