Most setup problems show on the step itself. Find the symptom below: each row says why it happens and what to do, including when to contact support.
Access and activation (before step 1, steps 1 and 2)
| Symptom | Step | Likely cause | What to do |
|---|---|---|---|
| Every Smart Banners section shows a presentation page | Before step 1 | Smart Banners is not activated for your company yet, or not included in your plan. | Nothing to do in the console. Contact support right away, or ask your account manager. |
| Smart Banners › Setup shows Unable to load banner setup | Before step 1 | On Microsoft 365, the Smart Banners consent has never been granted for your tenant; otherwise a temporary error. | On Microsoft 365, click Go to user provisioning settings and grant Grant Email Process Consent to LibraCyber (Step 2: API Access Setup › A · Microsoft 365). Otherwise reload the page after a few minutes. Contact support if the page persists after the consent shows Already granted. |
| Company Setup shows a warning | 1 | The setup on LibraCyber's side is not finished. | Nothing to do in the console. Contact support right away. |
| API Access Setup shows Not connected (Microsoft 365) | 2A | The consent that lets Smart Banners process your emails was not granted, not completed by a Global Administrator, or was removed. | Grant it again with a Global Administrator account; use Copy link if you are not one. Contact support if it persists after a completed consent. |
| No Grant Consent button in the consent dialog | 2A | You are working on a company other than your own (for example as an MSP). | Use Copy link and send the link to the company's Global Administrator. |
| API Access Setup shows User Service Account not setup (Google Workspace) | 2B | LibraCyber has not created your Smart Banners service account yet. | Nothing to do in the console. Contact support right away. |
| API Access Setup stays red although the Google guide was followed | 2B | The confirmation is not ticked. | Tick I confirm I have given access to the service account. |
| Microsoft 365, users imported by CSV show Can't be activated · Missing Microsoft 365 ID | Prerequisites | The CSV file has no Microsoft 365 user ID for these users. | Add the external_id column to your CSV file and import it again. Contact support if the status persists after the import. |
Test, analysis and sample emails (steps 3 to 6)
| Symptom | Step | Likely cause | What to do |
|---|---|---|---|
| Test deployment is greyed out with Not available in MSP mode | 3 | You are working on the company from the MSP Portal: the test can only be run from the company's own console. | Ask an administrator of the company to run the step. |
| No test email, or a test email without the green banner | 3 | You are not Active yourself, the access of step 2 is incomplete, or the test email was not delivered. | Follow Step 3: Test Deployment › What if I don't receive the green banner? Contact support if the banner still does not appear after these checks. |
| Run historical analysis shows You cannot select more than 100 users | 4 | An analysis covers at most 100 users. | Run several analyses. |
| Safe Lists opens the Preferences tab | 5 | Known behaviour of the button. | Open the Safe List tab. |
| Send sample emails fails or warns about a missing CEO | 6 | A CEO scenario is selected and no CEO is set in General Settings › Company Scan › Key People: the step shows To use this feature, the Key People must be filled out. | Set a CEO linked to a provisioned email address, or unselect that scenario. Contact support if the message persists with a CEO set. |
| Some users cannot be selected as targets in Send sample emails | 6 | Only Active users can receive sample emails. | Activate the users in Smart Banners › Users. |
| A sample email arrives without the expected banner | 6 | Some samples occasionally arrive without their banner. | Send the sample again to the same user. Contact support if it arrives again without its banner. |
Rollout and turning off (step 7, offboarding)
| Symptom | Step | Likely cause | What to do |
|---|---|---|---|
| New users are not activated automatically | 7 | Enable Auto Engage is off, the first daily run has not happened yet (the next morning, at about 10:00 UTC), or the users were switched off by hand. Users who Can't be activated are skipped too. | Check Enable Auto Engage in Step 7: Engage Company, wait for the next daily run, or activate the users in Smart Banners › Users. Contact support if users are still Inactive the day after the next run. |
| After Turn off for everyone, users are active again | Offboarding | Enable Auto Engage was switched back on, so the next daily run activated again everyone who had not been switched off one by one. | Switch Enable Auto Engage off, then use Turn off for everyone again. |